| 1 | Supply and fixing Automatic Phase Sequence Correctors of capacity 160 Amp 3Phase, 415V, 50Hz, enclosed in CRCA sheet factory made of thickness 2.6mm finished weatner proot ana vermin proot painted IP-54 protection wIth highly following accessorles:
(i) 3 Phase Contactors of capacity 160A
iil) 3 Phase sequence relays of capacity 160A with thermal and overload protection
(iii) 3 Phase Correction mechanism controller with display board of capacity 160A logger monitoring, tripping alarm pnase tallure/under
having facility to reset, auto and manual mode, data control, overload alarm control, short circuit alarm control voiltage alarm control complete set.
(iv) RYB LED Indicators.
(v) Voltmeter and Ammeter or Multi Function Meter.
(vi) Pre wiring of all components with copper FRLS wire | 1.00 | Each |
| 2 | Supply and fixing Automatic Phase Sequence Correctors of capacity 63 Amp 3Phase, 415V, 50Hz, enclosed in CRCA sheet factory made of thickness 2.6mm finished weather proof and vermin proof painted IP-54 protection wIth highly following accessorles:
(i) 3 Phase Contactors of capacity 63A as per OEM design.
iil) 3 Phase sequence relays of capacity 63A with thermal and overload protection
(iii) 3 Phase Correction mechanism controller with display board of capacity 63A, having facility to reset, auto and manual mode, data logger monitoring, tripping alarm control, overload alarm control, phase failure/ under voltage alarm control complete set.
(iv) RYB LED indicators.
(v) Voltmeter and Ammeter or Multi function Meter.
(vi) Pre wiring of all components with copper FRLS wire | 2.00 | Each |
| 3 | Supply and fixing Automatic Phase Sequence Correctors of capacity 40 Amp 3Phase, 415V, 50Hz, enclosed in CRCA sheet factory made of thickness 2.6mm finished weather proof and vermin proof painted IP-54 protection wIth highly following accessorles:
(i) 3 Phase Contactors of capacity 40A as per OEM design.
iil) 3 Phase sequence relays of capacity 40A with thermal and overload protection
(iii) 3 Phase Correction mechanism controller with display board of capacity 40A, having facility to reset, auto and manual mode, data logger monitoring, tripping alarm control, overload alarm control, short circuit alarm control, phase failure/ under voltage alarm control complete set.
(iv) RYB LED Indicators.
(v) Voltmeter and Ammeter or Multi function Meter.
(vi) Pre wiring of all components with copper FRLS wire. | 1.00 | Each |
| 4 | S&F in repairs HFFR PVC insulated multistranded copper conductor cable 4 core of size 25 Sqmm, 1100 volt, complete all as specified and directed. | 7.00 | Running Metre |
| 5 | Material and labour for manufacturing, installation testing and commissioning of factory made and tested, CPRI approved AMF panel for 600 KVA DG set, indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 Volts, 3 phase 4 wire 50Hz AC supply system, conforming to IS - 5039, IP-54 class protection and made of 2mm CRCA mild steel sheet with 50x 50x6mm angle iron frame, hinged doors, front & rear opeing and locking arrangement with necessary bus bar arrangment with insulated Al. bus bar 1500 Amps rating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for ACB with suitable capacity of Al. bus bar strips including heat shrinkable sleeves, and providing extended bus bars with chember arrangement for outgoing cables, copper control wiring of required size for instruments including necessary PCC in 1:2:4 type B1 using 20mm graded stone aggregate for platform of suitable size , prewired with copper cable of suitable size all as standard practice of manufacturer specifications with the following accessories:- | 1.00 | Each Job |
