Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4326593 |
|---|---|
| Organisation Name | Indo Tibetan Border Police |
| Tender Brief | Corrigendum : Installation Of Submersible Pump And Laying Of Water Supply Line At Goting Bop Of 8th Bn Itb Police Gauchar Uttarakhand |
| Last Date For Submission | 16th Jun, 2026 |
| Opening Date | 17 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 37301.00 |
| Estimated Cost | 1865073.00 |
| City | Chamoli |
|---|---|
| State | Uttarakhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Carrying out ground water servey using VES method at Goting BOP of 8th BN ITBP, Gauchar. | 1.00 | Job |
| 2 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders 125 mm dia | 100.00 | Mtr |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia having minimum wall thickness 5.00 mm | 50.00 | Mtr |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia | 50.00 | Mtr |
| 5 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approvedlaboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | 8.00 | Hrs |
5 Days Left