Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4449056 |
|---|---|
| Organisation Name | Assam Rifles |
| Tender Brief | Term Contract For Artificers Work For Resdl And Non Resdl Building At Cob Champhai |
| Last Date For Submission | 12th Jun, 2026 |
| Opening Date | 13 Jun, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 9973.00 |
| Estimated Cost | 498665.00 |
| City | Champhai |
|---|---|
| State | Mizoram |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 192.00 | Sqm |
| 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet | 192.00 | Sqm |
| 3 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) | 8.10 | Sqm |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length | 0.26 | Cum |
| 5 | Providing and fixing Glazing of 4 mm polycarbonate acrylic Fiber sheet, with silicon sealent and nails wherever necessary including racking out the old putty: Glazing of 4 mm polycarbonate Fiber plastic sheet (Silicon Make :- Dr Fixit 501 or equilivent Brand) | 8.10 | Sqm |
12 Days Left