Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4633809 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Painting Of Runway Track, Taxi Track And Bay Marking Including Dispersal Area And Other Miscellaneous Work At Af Stn Chandigarh |
| Last Date For Submission | 13th Jul, 2026 |
| Opening Date | 20 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 3000000.00 |
| City | Chandigarh |
|---|---|
| State | Chandigarh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Surface derssing /Grass scraping not exceeding 15 cm deep and getting out in soft / loose soil along the runway shoulder including grass vegetation, shrubs and earth work from the edge of runway, taxiway, surrounding blast pans or similar work complete all as specified and directed. and removing the rubbish taken from the site and leaving out side of MoD land, complete all as specified and directed. | 2200.00 | SQUARE METRE |
| 2 | Material and labour for painting one coat of water based paint after preparation of old surfaces as per manufacturer's instructions for making lines, dashes, arrows, letters etc. on bituminous/ concrete roads, pavement, runways and other similar surfaces exc. 10 cm width or girth, with road marking paint/ traffic paint (water based) conforming to the requirements of IS-164 (1981) thickness in micron not less than 50 micron, white or golden yellow or any other shade approved by GE/Users by using air less spray machine Graco line 3900 with two guns and the maximum GPM (LPM) : 160 (6.0) PSI (Bar) 3300 (227) Engine CC (HP) 120 CC and maximum tip size : 0.029, complete all as specified and directed. | 28000.00 | SQUARE METRE |
| 3 | Material & labour for Water Born Paint (WBP) having DFT 240 micron thick road marking strips (retro-reflective) of specified shade / colour using by fully/ semi automatic paint applicator machine ( using cold airless spray / striper machine with minimum two spray gun) including application of Drop on glass beads driven by experienced operator on road surfaces including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc complete and accordance with applicable specification on bitumenus surfaces / concrete by using air less spray machine colour of paint shall be white / yellow / Black / Red or any colour as approved by GE/Users on Taxiway / Dispersal markings exceeding 10 cm width or girth as per recommended dimension, application of the paint by Machine Graco line lazer 3900 with 2 guns and the maximum GPM(LPM) : 160 (6.0) PSI (Bar) - 3300 (227), Engine CC (hp) 120 cc and maximum tip size : 0.029, complete all as specified and directed. Note for item No 2 & 3: The work will be carried out by authorized applicator of Manufacture/Company as approved by the GE. | 3100.00 | SQUARE METRE |
| 4 | Notes:-The tenderer shall take into consideration for the following points while quoting his rate for the items and his quoted rates shall be deemed to be included the following: (i) The work will be carried out by patch work near runway. (ii) Complete work shall be carried out within very short period of 5 hours each in five closures and working time will be started 0830 hrs at each sunday and the work will be completed 1330 hrs on sunday, Four - five closures falls within the month. The work is to be executed upto the satisfaction without any break during runway closures in 05 hrs shift, During each shift contractor has to arrange skilled worker experienced supervisor and T&P and sufficient lighting arrangement with genset for low light conditions. (iii) Panel recovery of 100% of quoted rate for Srl item no. 2.00 & 3.00 shall be made in case the work against these item are not completed by the contractor within specified period of runway closures. (iv) All necessary arrangement of for working in day and night during runway closures will be made by contractor without any extra cost to the Govt. including sufficient light arrangement through Gen set as when required. (v) The entire work on each closures to be executed at two different locations of by two teams of skilled labour alongwith separate T&P required in each shift of 05 hrs all as directed and specified by Engineer-in-charge. |
6 Days Left