Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4974607 |
|---|---|
| Organisation Name | Chandigarh Administration |
| Tender Brief | Corrigendum : Special Repair To Residential Buildings Under Maintenance Booth Sector 16, Chandigarh. (287 And Other Houses) |
| Last Date For Submission | 27th Jul, 2026 |
| Opening Date | 27 Jul, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 9722.00 |
| Estimated Cost | 486102.00 |
| City | Chandigarh |
|---|---|
| State | Chandigarh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses andframed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1083.65 | KG |
| 2 | Total Providing and fixing 60mm thick PUF wall Panels continuous line sandwich with 0 40 mm thick TCT PPGI (120 gm, 240 mpa coated sheet of make JSW. Satmax. Lloyd, sintex, Mectec, Rinac (Conforming to IS: 12436) on both side having polyurethane foam of density 40+ 2kg/cum between sheets. The panel sheet shall have corrugated sheet at top having crest of approx 30mm and the bottom shall be plane sheet with ribs. The panel sheets have one meter width and panel length as per length of room without any joint. The panel shall be fixed in tongue and groove joint with help of flashing comprising of PPGI U channels, L- section, end cap, POP revits, screws and other accessories complete in all respect. The PUF shall be CFC free and ozone friendly made with blowing agent will be N- Pantene. The gap at joint shall be filled with silicon sealant of approved brand (Macoy, pidilite or its equivalent). These panels shall be fixed in alignment and plumb complete in all respect to the entire satisfaction to the Engineer incharge Short walls | 27.85 | SQM |
| 3 | Providing and fixing 40mm thick PUF celling Panels continuous line sandwich with 0.40 mm thick TCT PPGI (120 gm, 240 mpa coated sheet of make JSW. Satmax. Lloyd, sintex, Mectec, Rinac (Conforming to IS: 12436) on both side having polyurethane foam of density 40 2kg/cum between sheets. The panel sheet shall have corrugated sheet at top having crest of approx 30mm and the bottom shall be plane sheet with ribs. The panel sheets have one meter width and panel length as per length of room without any joint. The panel shall be fixed in tongue and groove joint with help of flashing comprising of PPGI U channels, L- section, end cap, POP revits, screws and other accessories complete in all respect. The PUF shall be CFC free and ozone friendly made with blowing agent will be N- Pantene. The gap at joint shall be filled with silicon sealant of approved brand (Macoy, pidilite or its equivalent). These panels shall be fixed in alignment and plumb complete in all respect to the entire satisfaction to the Engineer in charge | 35.50 | SQM |
| 4 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | 42.62 | RMT |
| 5 | Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge. | 27.85 | SQM |
2 Days Left