Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4450354 |
|---|---|
| Organisation Name | Chandigarh Administration |
| Tender Brief | Restoration Repair Upgradation Of Internal Roads And Parking Of Grain Market Sector 26 Chandigarh |
| Last Date For Submission | 12th Jun, 2026 |
| Opening Date | 12 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 2325636.00 |
| Estimated Cost | 132563595.00 |
| City | Chandigarh |
|---|---|
| State | Chandigarh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing, mixing, and applying a bonding coat of elastomeric concrete having physical and performance properties conforming to Table 12.3 of IRC SP:083 (2018) on damaged portions of RCC pavement to an average thickness of 75 mm, with application carried out as per IRC SP:083 (2018). The work shall also include chipping and removal of unsound or weak concrete from the existing cement concrete pavement to the same average thickness as the application of elastomeric concrete using manual chisels and/or approved power-driven percussion type equipment, tapering of all edges, formation of square shoulders of cavities, cleaning of the exposed concrete surface and reinforcement with wire brushes, and disposal of all debris for all leads and lifts. The item shall include all labour, materials, tools, plant, and incidental works, complete in all respects, as per the directions of the Engineer-in-Charge. | 1076.07 | Sqm |
| 2 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars | 1470.14 | Kg |
| 3 | Providing and laying design mix cement concrete of M-40 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (20 mm wide x30 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer- in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-40 is @ 390kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. | 951.59 | Cum |
| 4 | Providing and filling in position rubberized bitumen hot sealing compoundfor sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. | 254.42 | Per cm depth per cm width per metre length |
| 5 | Providing and laying tack coat with bitumen VG-10 @ 3.00 kg/10 sqm using sprayer pump on prepared surface heating bitumen in boiler and spraying bitumen with spray set fitted on bitumen boiler including cleaning of road surface with complete in all respect as per MORT&H specification and to the entire satisfaction of the Engineer-in-charge. | 1176.73 | Sqm |
12 Days Left