Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3793890 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Cwe/chd-136/2025-26 Special Repair To Or Md Accn Building No 299 To 306 At Mil Stn Nahan Under Ge Chandigarh |
| Last Date For Submission | 24th Apr, 2026 |
| Opening Date | 27 Apr, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 152500.00 |
| Estimated Cost | 8500000.00 |
| City | Chandimandir |
|---|---|
| State | Haryana |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 including using WPC as per manufacturer's instruction, complete including taking down cement plaster on brick walls, including raking out joints, hacking for key, scrubbing down with water etc., including cutting of trees, shrubs or any type of vegetation upto three storey building complete all as specified. (Note- WPC will be measured and paid seperately) | 7606.00 | SQUARE METRE |
| 2 | Supply only liquid water proofing compound all as specified and as directed. | 290.00 | LITRE |
| 3 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 1 mm thick wall care putty and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of the newly plastered wall surfaces complete all as specified and as directed by Engineer-in-Charge. | 7606.00 | SQUARE METRE |
| 4 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each complete all as specified and as directed by Engineer-in-Charge. | 350.00 | EACH |
| 5 | M&L for providing and fixing powder coated aluminium work (thickness of powder coating not less than 50 micron) for doors, windows, ventilators, casement/ sliding shutters and partitions with extruded built up standard tabular/ appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner including neceesary filling up of gaps at junctions at top, bottom & sides with required PVC neoprene belt etc., Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleats angles, aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws including providing hinges/ pivot and making provision for fixing of fittings wherever required complete all as specified and as directed by Engineer-in-Charge. | 3906.00 | KILOGRAM |
6 Days Left