Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4446104 |
|---|---|
| Organisation Name | Western Coalfields Limited |
| Tender Brief | Repairing Of Bituminous Road To-wards Gouri Nallah Turning To Sasti Ocm And Magazine Ap-proach Road Under Gouri Pouni Sub Area |
| Last Date For Submission | 15th Jun, 2026 |
| Opening Date | 16 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 91900.00 |
| Estimated Cost | 7350611.00 |
| City | Chandrapur |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and applying tack coat with low viscosity bitumen of VG 10 grade using bitumen pressure sprayer on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. 0.25 kg per sqm (normal bituminous surface) | 14685.00 | Sqm |
| 2 | Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications a) Using Batch Mix Pint of appropriate capacity and Paver finisher Hydraustatic with Sensor.(i) for Grading II(19 mm nominal size ) bitumen content 3.5% | 323.00 | Cum |
| 3 | Providing and laying bituminous concrete using crushed aggregates of specified grading. premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification a) Using Batch Mix Plant of appropriate capacity and Paver Finisher Hydraustatic with Sensor control.(iv) for Grading-II(30-45mm thickness) with 60/70 bitumen (VG-30) | 205.00 | Cum |
| 4 | Seal Coat - Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats all complete as per clause 511 of specification.(ii) Case - II : Type B (Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping (aggregate shall pass 2.36mm seal and retained to 180 micron sieve) and penetration bitumen of suitable grade all complete as per clause 551 of specification | 1752.00 | Sqm |
| 5 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes all complete as per clause 803 of specifications. | 520.00 | Sqm |
15 Days Left