Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 2833453 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repairs Replacement Of Ber Lifts In Covetec Building At Tech Area At Cvrde, Avadi Under Age I Rnd Avadi |
| Last Date For Submission | 18th Mar, 2026 |
| Opening Date | 20 Mar, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 80000.00 |
| Estimated Cost | 4000000.00 |
| City | Chennai |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Design, manufacture, supply, installation, testing and commissioning passenger lift of capacity 544 Kgs (8 Passengers) electrically operated microprocessor based controlled fully automatic stainless steel sliding doors and car enclosure with AC variable voltage and variable frequency with close loop control for serving upto 4 floors (G+3) at speed of 1.0 m/sec complete all as specified and directed. Details of lifts are as under :- (a) Type of lift : Goods cum passenger lift (Service lift). (b) Load/No of person : 544 Kg/8 Passengers. (c) Speed : 1 mps. (d) Power : AC, three phase, 50 Hz, 415 volt. (e) Type of control : AC variable and variable frequency. (f) Machine : Permanent Magnet (PM Gearless motor (located in shaft on top of guiderails). (g) Inside size of car : 1300 mm x 1100mm x 2200mm (length x width x height). (h) Car door : Two sides with hair line finish. (j) Car enclosure: Stainless steel SS-304. (k) Landing Entrance : Sliding stainless steel on same side on different floors location. (l) Door opening: 800mm x 2000mm (width & height). | 2.00 | EACH |
| 2 | (m) Counterweight : Guide rail of T section made out of steel counter weight to be on side/rear of car enclosure as per manufacturer's design. (n) Clear hoist way size: 1800mm x 1700mm (width & depth). (o) Flooring: Granite. (p) Location: CVRDE Avadi Chennai. (q) Operation: Duplex, selective, collective with / without attendant. (r) Signals and standard features: (i) Combined luminious hall bottons with digital hall position indicators at all floors. (ii) Digital car position indicator in the car. (iii) One car operating panel with luminious button in ar. (iv) One car direction indicator in car. (v) Battery operated alarm bell and emergency light alongwith luminous button in car. (vi) Overload warning features in car. (vii) Auto rescue device with maintenance free batteries and charger. (viii) Microprocessor based controller. (ix) Built in voltage stabilizer in control panel. (x) Belt inspection drive. (xi) Auto fan cut off. (xii) Emergency firemen's service, voice synthesizer and intercom connection. | ||
| 3 | Dismantling and taking down old lift complete with sliding doors and carriage including all associated components and stacking at site after disconnection of all electrical connections, transportation to the MES store yard complete all as specified and directed. Note:- Quoted rate is deemed to be inclusive of dismantling the old lift, loading/unloading, transporation and handing over to MES at store yard including necessary T&P required at site. | 2.00 | EACH JOB |
| 4 | Supply, laying, connecting and testing XLPE insulated PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 volts grade with standard aluminium conductor of size 25 Sqmm 3.5 core confirming to IS-7098, Part-I/2011 with latest amendments laid in cable trenches / duct / wall / surfaces / pipe including compression gland, lugs as required at site, complete all as specified and directed. | 30.00 | RUNNING METRE |
| 5 | Laying of one chamber PVC insulated PVC sheathed XLPE power cable 1.1 KV grade of size 25 Sqmm x 3.5 core direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required, complete all as specified and directed. | 30.00 | RUNNING METRE |
14 Days Left