Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4213739 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repairs To Auditorium Annexe Ground Floor Dh Annexe Building In Technical Area At Cvrde Avadi Chennai |
| Last Date For Submission | 11th Jun, 2026 |
| Opening Date | 15 Jun, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 187730.00 |
| Estimated Cost | 11273000.00 |
| City | Chennai |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolishing cement concrete (unreinforced) in manually / by mechanical means of nominal concrete 1:3:6 or richer mix (including equivalent design mix) including disposal of material within 50metres lead complete all as specified and directed. | 29.00 | CUBIC METRE |
| 2 | M&L of 62mm thick cement concrete flooring with concrete hardener topping, under layer 50mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kgs of cement or as per manufacture s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc., complete all as specified and directed. | 158.00 | SQUARE METRE |
| 3 | M&L for 3mm thick epoxy medium duty flooring of any shade consisting of following: - Preparation of surface by scarifying the concrete surface to remove all oil, grease, paint or any other foreign particles and ensure complete adhesion of the coating to base floor using floor griding with vaccumiser. the concrete surface shall have a rough clean, dust free before application of high compressive strength epoxy flooring complete all as specified and directed. | 158.00 | SQUARE METRE |
| 4 | Providing and applying two component primer CIPOXY 11 (100 microns) of CIPY or equivalent of FOSROC/BASF on the prepared surface by brush / roller covered and sealed evenly on entire surface and allow for 4-5 hours curing. Applying two components CIPOXY-90 (in combination with graded aggregates, offers the highest compressive strength, greater than 100 MPa among the epoxy screed) mortar in the ratio 2:1 and mixed with 2.5 parts of Silica Quartz in a powder mixture to achieve homogenous and applied & levelled by trowelling to form a monolithic layer to a thickness of 1900microns and allow curing for 4-5 hours complete all as specified and directed. | ||
| 5 | Self leveling EPU top coat with CIPOTHANE SL 1000 of CIPY or equivalent of FOSROC/BASF at a specified ratio and levelled by trowelling to a thickness of 1000 micron and spike roller is applied for de-aeration. The entire top coat has to be dried for 24 hours before loading complete all as specified and directed. |
15 Days Left