Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4869744 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Main Gate And Weather Shelter Of Pocket A |
| Last Date For Submission | 5th Aug, 2026 |
| Opening Date | 08 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 18000.00 |
| Estimated Cost | 0.00 |
| City | Coimbatore |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolition of (Unreinforcement) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) | 13.14 | Cum |
| 2 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specfified and directed. | 131.35 | Sqm |
| 3 | M & L for M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. | 0.51 | Cum |
| 4 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified. | 927.00 | Kg |
| 5 | Providing, fabricating and fixing MS laser cut panel of approved design and pattern using 3 mm thick MS sheet, including supply of MS plate/sheet, CNC laser cutting as per approved drawing, edge finishing, necessary stiffeners/supports if required, and surface preparation, followed by powder coating in approved shade with minimum coating thickness of 60 80 microns, complete in all respects including all materials, labour, consumables, machinery, loading/unloading, transportation, and all incidental charges as directed by Engineer-in-Charge. Note:- MS frame shall be measured and paid separately under relevant SSR items. | 87.50 | Sqm |
6 Days Left