| 1 | Supply of 16 Mtrs High Mast, Material of Construction: BS EN 10025 / IS 2062 Thickness of Material, Top Section : 3 MM , Bottom Section: 4 M M, Cross Section of Mast: 20 Sided Polygon, Length of Individual Section, Top Section : 8.350 M trs, Bottom Section:8.350 Mtrs, Base & Top Diameter i) Base Dia : 360 MM (Approx),Top Dia :150 M M (Approx),Type of Joints: Stress Slip Fit Joint, Length of Overlap: 1.5 times the dia. if Insertion, M etal Protection Treatment : Hot Dip Galvanised as per IS 4759/ IS 2629,Thickness of | 1.000 | Nos. |
| 2 | Supply of feeder pillar shall be of outdoor type, stand mounting,dust and vermin proof panel sha l be made out of FRP. Cable entry sha l be at the bottomand through a detachable gland plate. Labels shall be aluminum anodized. Stand for mounting shall be made out of 40 X 40 X 5 M.S Angle.Feeder pi lar sha l have pad-locking arrangement, The dimensions of the panel sha l be at least 400 (L) X 250 (B) x600 (H), The incomer MCB should be 63 Amps, TPN suitable for 415V , 50 HzSupply. suitable for termination of 4C X 16sq.mm aluminium cables. The flexible cables shall be terminated neatly with insulated lugs of appropriate size, MCB 63A TPN 1No, 16A SP 12 Nos,10A SP 1 No,240V AC Contactor with 63A contacts, 240V AC, Time switch
(MAKE: ABB /L& T /lEGRAND only | 1.000 | Nos. |
| 3 | Supply and fixing of lighting Fixtures of 200 Watt. LED Flood Light with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12) and Driver Topology Isolated, Driver Construction (Potted / Open Frame) - Potted, Input Power (W) 200 5%, Input Voltage (V) 230+5%, Input Current (M a) 850 +5%, Power Factor >0.95 , Thd % <10%, Driver Efficiency (%) 85, Operating Voltage (V)110~290 Vac, Operating Frequency (Hz)50, Output Open Circuit Protection Yes, Output Short Circuit Protection Yes, Low Voltage Circuit Protection - Yes, 100 15vac , Over Voltage Circuit Protection - Yes, 300 15vac, Overload/ Thermal Protection Yes, Driver Inbuilt Surge Protection 4.0kv, External Surge Protection 10.0kva, Electric Strength A s Per Is 16102 - 1.5 K v, Led (Nichia, Cree, Osram), 5050, 5w, Luminous Flux(Lumen) 5% 26000, Luminous Efficacy (Lm/W) 5% 130, Colour Temperature (K ) 5500k~6500k, Led Efficacy (Lm/W) 5% >135, Cri 70, Product Beam A ngle (Degree) 90 , Working Temperature Range( C) 10 To +55, Working Humidity Range 0 - 95%, IP Grade IP 66, Product Dimensions 390mmx302mmx140mm, Housing Aluminium Die Casting Corrosion Free Powder Coated , Tilt/ Adjustable Cradle M s, Powder Coated Angle Adjustable Diffuser / Cover Heat Resistance Toughened Glass etc. complete as per direction of the Engineer-in-Charge. (Make : Bajaj / Crompton / Philips / Havells or equivalent make with LED fixture that has been approved by ISO & BIS in corporate the LM 79 & LM 80) | 9.000 | Nos. |
| 4 | Supply of IP 65 LED Twin Drum Aviation light having epoxy flame orange painted die-cast aluminum a loy housing, with polycarbonate glass, and photoce l for automatic operation for dusk to dawn. Frequency 50 HZ , Luminaire life Expectance : 50000 Hrs. operating input voltage range 100 270V AC | 1.000 | Nos. |
| 5 | Construction of a shalow foundation for a 16-meter high mast using Drawing Grade concrete of specified design mix (minimum M25), including excavation, reinforcement, shuttering, concrete placement, anchor bolt fixing as per high mast manufacturer s drawing, and backfi ling, a l based on a safe soil bearing capacity of 10 T/m . The scope includes the supply of all required materials such as cement, aggregates, reinforcement steel (Fe500D), anchor bolts, and non-shrink grout as per the direction
of the Engineer-in-Charge. (Erection Part) | 1.000 | Nos. |
