Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4568522 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Smart Periodical Services And Miscellaneous Works For Internal And External Surfaces At Dalhousie Cantt Under Age(i) Dalhousie |
| Last Date For Submission | 10th Jul, 2026 |
| Opening Date | 14 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 19000.00 |
| Estimated Cost | 950000.00 |
| City | Dalhousie |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for Rendering 15 mm thick in two layers (10+5) on fair facesor other than fair faces of brick work, concrete sruface,stone masonary in cement mortar (1:6), finished even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by Engr-in-charge. Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account.all as specified and directed. | 360.00 | Sqm |
| 2 | M&L for Rendering 15 mm thick in two layers (10+5) on other than fair faces of brick work,stone masonary surface, concrete surface in cement mortar (1:4), finished even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by engr-in-charge. Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account. | 500.00 | Sqm |
| 3 | M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by engr-in-charge. Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account.all as specified and directed. | 30.00 | Sqm |
| 4 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed. | 3000.00 | Sqm |
| 5 | M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface Note: Where thickness of putty is required more than 1mm thick, the same shall be make good using POP and than putty shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account. | 3860.00 | Sqm |
6 Days Left