Complete Tender Details

Empowering Indian businesses in the procurement ecosystem since 2012

Tendering Authority: Military Engineer Services
Tender ID4498951
Organisation NameMilitary Engineer Services
Tender BriefCorrigendum : Addition/ Alteration And Special Repairs To Hangars With Allied Buildings At Daman
Last Date For Submission10th Sep, 2026
Opening Date17 Sep, 2026
Cost
Document Cost3000.00
EMD734450.00
Estimated Cost81890000.00
Location
CityDaman
StateGujarat

Register to see full details

BOQ Items
#ItemQtyUnits
1REPAIR & RETROFITTING WORKS
2Nozzle Fixing: M & L for drilling 12 - 16 mm dia holes, at specified spacing, at locations with honeycombing/ voids/ construction joints/ cracks etc., placing 8 - 12 mm dia nozzle of 75 mm length suitable for grouting into a 150 mm deep hole using polymer mortar including cutting of nozzle after grouting and finishing with polymer mortar etc. complete all as specified and directed. Notes: 1. The quoted rate shall be deemed to be inclusive of: a. Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping the same with chisel after demarking at upto 15m height. b. Providing and fixing scaffolding system as suitable on the exterior side of building/structure, upto required height of 15m, above ground level. The scaffolding system shall be suitablly stiffened with bracings, runners, connecting with the building etc, complete as per directions and approval of Engineer-in-charge. 2. Grouting material shall be measured and paid under appropriate items of this schedule.20.00Nos
3Injection Grouting: M & L for providing and applying grout made of cement slurry mixed with non-shrink additive like MasterFlow 150 of BASF / Cebex 100 of Fosroc / Intraplast Ep of Sika or equivalent by injection grouting under pressure through nozzles provided, into cracks/ honeycombed areas by using suitable grouting pump till refusal including all tools and tackles, transportation, supervision etc, complete all as specified and directed.90.00Ltr
4M & L for cleaning rusted reinforcement bars by tapping or using mechanical wire brush or any other suitable way including from all around the reinforcement bars to give it a totally rust free finished steel surface complete all as specified and directed. Note: Mode of measurement - Flat surface area of exposed reinforcement.225.00Sqm
5M & L for supplying and providing one component, polymer modifed, cementitious anti-corrosive primer, formulated to provide dual protection of a polymeric barrier and an integral corrosion-inhibiting system, to the existing steel and additional steel provided before patching of damaged areas, using suitable tools and equipment, all as per manufacturer's instructions complete all as specified and directed. Make: BASF MasterEmaco P130 / Fosroc Nitoprime Zincrich / Sika Rustoff 100 or other equivalent. Note: Mode of measurement - Flat surface area of exposed reinforcement.225.00Sqm
10th Sep, 2026

36 Days Left

WhatsApp