Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4845530 |
|---|---|
| Organisation Name | Pey Jal Nigam Uttarakhand |
| Tender Brief | Corrigendum : Furniture And Furnishing Work For 500 Bedded Hospital At Doon Medical College, Dehradun |
| Last Date For Submission | 6th Aug, 2026 |
| Opening Date | 07 Aug, 2026 |
| Document Cost | 11800.00 |
|---|---|
| EMD | 1709000.00 |
| Estimated Cost | 85429000.00 |
| City | DEHRADUN |
|---|---|
| State | Uttarakhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Enterprise Entpr 1500 with CPU hanger Providing & placing in position office table with with CPU Hanger with overall size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . | 5.00 | Nos |
| 2 | Motion High Back Larger Seat - Adjustable Armrests Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6 0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 0.3 cm . PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0 0.5 cm. pitch centre diameter and 76.0 1.0 cm. with castors . TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 0.1 cm wheel diamter assembled to the pedestal. Overall Dimensions of Chair Seat Height - min 44.5 to max 53.8 cm. Height - min 99.5 to max 108.8 cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. | 82.00 | Nos |
| 3 | Bliss -3 Str Metal Perforated Without Arm Providing, supplying and placing of public seating. SEAT/BACK FRAME ASSEMBLY: The seat and back should be made of 0.1 0.012 cm thick CR steel perforated sheets which should be welded to a seat/back frame assembly made of 0 1.9 0.02cm x 0.16 0.0128 cm thk MS ERW tube. Connecting Strips made of 0.5cm thick HR steel should be welded to the structure. The mounting base subassembly made up of 0 1.9 0.02cm x 0.16 0.0128 cm thk & C-channel made of, 0.315 0.022cm HR steel welded to connecting strip for assembly with the connecting beam. SEAT. SIZE: 39.2cm. (W) x 41.5cm.(D) (Approx.) BACK SIZE:39.5cm. (W) x 21.5cm.(H) (Approx.) CONNECTING BEAM ASSEMBLY: It should be made up of 5.0 0.03 cm x 5.0 0.03 cm x 0.16 0.0128 cm thk. M.S.E.R.W Squshould be tube. The connecting beam should be powder coated ( DFT 40-60 microns ). The ends of the Beam should be closed with L-shaped plastic end cap made from PP material. The connecting beam assembly should be powder coated (DFT 40-60 microns). LEG ASSEMBLY: It should be made up of 5.0 0.03 cm x 5.0 0.03 cm x0.16 0.0128 cm thk. M.S.E.R.W Squ should be tube. and 0 3.175 0.03 cm x 0.2 0.016 cm thk M.S.E.R.W tube welded together to C-channel made of 0.2 0.018 cm thk CR steel. Plastic End caps should be fitted to Legs. The leg assembly should be powder coated ( DFT 40-60 microns). Overall Dimensions of Chair Seat Height - 44.5 cm. Height - 77.5 cm. Width & Depth of Chair as - Width-160.0cm and Depth-57.5 cm. | 126.00 | Nos |
| 4 | Enterprise Table Size 1200 W x 600 D x 728 H Providing & placing in position office table with overall size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . GreenGuard, IAQ Gold & GRIHA | 75.00 | Nos |
| 5 | Motion High Back - ZOOM High Back Chair (Grey Colour) (FG000907) Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6 0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 0.3 cm . PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0 0.5 cm. pitch centre diameter and 76.0 1.0 cm. with castors . TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 0.1 cm wheel diamter assembled to the pedestal. Overall Dimensions of Chair Seat Height - min 44.5 to max 53.8 cm. Height - min 99.5 to max 108.8 cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. BIFMA Level 2 IAQ Gold GreenPro GRIHA | 66.00 | Nos |
12 Days Left