Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4131523 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair And Maintenance Of Lowering And Lifting Of Submersible, Centrifugal, Monoblock Pump Sets, Swimming Pool Filter Plant, Routine Maint Of Swimming Pools Including Connected Works At Ge Ima Dehradun |
| Last Date For Submission | 26th May, 2026 |
| Opening Date | 02 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 90000.00 |
| Estimated Cost | 4500000.00 |
| City | DEHRADUN |
|---|---|
| State | Uttarakhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Labour only for lifting /taking up of defective submersible pumping set of capacity 60 HP to 100 HP from deep tube well and dismantling of connected rising main i.e. non return valve, bend etc from delivery of pump set, lifting of column pipe of size 150 mm dia fixed with pumping set, unscrewing of column pipes from socket / flange cutting of welded strip unscrewing of cable holding clamps and disconnecting of submersible cable joint complete all as directed by EIC. | 5.00 | Each Job |
| 2 | Labour only for lowering of submersible pumping set of capacity 60 HP to 100 HP after repair and testing in deep tube well not less than 90 mtr below the ground level including lowering of column pipe size 150 mm dia by screwing with socket/flange welding or fixing MS strips, fixing of cable clamps etc up to the maximum depth of 150 mtr all as directed by EIC. Note: (i) Jointing material will be measured and paid separately. (ii) Repair of column pipe will be measured and paid separately. (iii) Contractor shall caution his staff during execution to take maximum precaution while lifting/lowering the pump set at site. In case any accident/injuries occurs the department will not held responsible for any miss happening due to negligence on their (workers) parts. Contractor shall be held totally responsible and all penalty /damages on this account shall be born by the contractor. (iv) Old material retrieved during lowering /lifting the contractor shall deposit to MES store yard without any extra cost. | 5.00 | Each Job |
| 3 | S&F of Cable jointing kit ( compound ) suitable for submersible cable of size up to 50 sqmm 3 core. | 5.00 | Each |
| 4 | M&L for repair to column pipe 150 mm dia having wall thickness 5 mm and 3 mtr long including transportation to workshop, cutting , threading , fabricating welding of same along with S&F MS flange of 8 mm thick having 150 mm bore dia and 8 Nos hole of 5/8 dia for fixing of nut and bolts on the both ends of the column pipe and welding the same to the pipe by means of MS strips of size 25 x 6 mm on four side of the flanges all as directed by EIC including transportation from workshop to site and stacking at site after repair complete all as specified and directed Note: In case any damage or loss of any pipe is noticed during transportation or in custody of the contractor the necessary recovery shall be effected from contractor s due to this regard | 5.00 | Each job |
| 5 | M&L rubber packing suitable for 150 mm dia flange 3 mm thick | 100.00 | Each |
5 Days Left