Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4644112 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Roof Treatment In Building No P-24 Of Technical Area A At Irde Under Ge (i) R And D Dehradun |
| Last Date For Submission | 10th Jul, 2026 |
| Opening Date | 13 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 95300.00 |
| Estimated Cost | 4761500.00 |
| City | DEHRADUN |
|---|---|
| State | Uttarakhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Removing of old treatment from old concrete floor/terrace taking down existing detoriated / decayed tarfelt or any treatment including loose surface, scraping with scraper, chiseling.scraping of surface with wire brush of any other method. sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 1000 m complete all as specified and directed. | 909.92 | Sqm |
| 2 | M&L Rendering 12 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 complete all as specified and directed. | 909.92 | Sqm |
| 3 | Supply only Integral waterproofing compound complete all as specified and directed. | 171.43 | Kg |
| 4 | Roof waterproofing with SBS Wet Boanded Membrane Providing and Applying Wet Applied Polymer Modified Bituminous Waterproofing Membrane (SikaShield W162 ED IN 1,5 mm) having release liner on both side for wet- application on the retaining wall. The procedure involves the concrete to be saturated by water (use water hose). Any protrusions need to be removed and the concrete surface needs to be cleaned. A bonding slurry SikaShield W1 (with approximate of 2 3 kg/m2) is applied to the substrate. At one end of the membrane, peel away part of the release liner from the membrane's underside (on the Sika sticker side). Bond this end of the membrane to the adhesive and the substrate. Continue to peel away the release liner sideways from the rest of the membrane's underside. Bond the rest of the membrane to the adhesive and the substrate and hard roll firmly fixing it onto the adhesive. The Modified Bituminous Waterproofing Membrane shall have following typical properties:Resistance to static puncture > 250 N (ASTM E154) Tensile strength 11 kN/m (ASTM D5147) Elongation 45 % (at break) (ASTM D5147) Tear strength Longitudinal 350 N Transverse 250 N (ASTM D5147) Joint shear resistance 500 Nz/5cm (EN 12317-1) Foldability at low temperature (At -25 C) Pass,No cracks observed (EN 1109) Permeability to liquid water Water Absorption (%) 0.5 (ASTM D5147) Resistance to water penetration No Leakage (ASTM D 5385) Ambient air temperature +10 C min. / +40 C max Relative air humidity Upto 80 % Substrate temperature +10 C min. / +40 C max | 909.92 | Sqm |
| 5 | Supplying and Laying of 120 gsm geotextile membrane over the coating before screed complete all as specified and directed. | 909.92 | Sqm |
6 Days Left