| 1 | SITC Of 9000mm Pelican Orna Eva Florian pole made of circular mild steel pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.6mm thick with 2450mm Height & Top section 114.3mm Dia x 3.2mm thick with 4304mm Height. Decorative base made of Gravity Die-cast aluminium (436mm Dia x 481mm Height) Decorative Die-cast Aluminium cone (230mm Dia x 150mm Height) coverd on the both section joint area. The single arm pelican orna eva bracket is a split constructed type, bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a decorative collar upto a height of 1615mm crowned at top with a decorative cast aluminium embellisment of 682mm Height. The artistically curved single arm made of MS Pipe 38.1mm x 2mm thick, spruced up with gravity die cast aluminium leaf and floral embellishment, is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at open ends and other end facilitates the fitment of luminaire at 885mm from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing . Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC 215. The base plate have a cable entry hole as per the base pipe size. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options | 48.00 | NOS |
| 2 | SITC OF 9000mm Pelican Orna Eva Florian pole made of circular mild steel pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.6mm thick with 2450mm Height & Top section 114.3mm Dia x 3.2mm thick with 4304mm Height. Decorative base made of Gravity Die-cast aluminium (436mm Dia x 481mm Height) Decorative Die-cast Aluminium cone (230mm Dia x 150mm Height) coverd on the both section joint area. The double arm pelican orna eva bracket is a split constructed type, bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a decorative collar upto a height of 1615mm crowned at top with a decorative cast aluminium embellisment of 682mm Height. The artistically curved double arm made of MS Pipe 38.1mm x 2mm thick, spruced up with gravity die cast aluminium leaf and floral embellishment, is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at open ends and other end facilitates the fitment of luminaire at 885mm on either sides from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope . The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC 215. The base plate have a cable entry hole as per the base pipe size. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options | 2.00 | NOS |
| 3 | Supply of 150W LED pendant mounted compact street light. Type IV (Asymmetrical light distribution). Luminaire made of specially contoured spun aluminium body of high corrosion resistance with a neck design for unique and better aesthetics and non corrosive stainless steel fasteners. Clear polycarbonate diffuser. The mounting arrangement nipple, coupling & Hex nut made of Stainless steel 304 suitable for mounting to internally threaded pipe of designation M30. Protection class IP65/66. Mechanical resistance IK09 (Polycarbonate diffuser). Pure polyester powder coated RAL9004 Black, RAL9007 Grey aluminium, RAL7016 Anthracite grey, Graphite grey or as per site requirement. Available colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)>70. LED module with expected service life of at least 72,000 operating hours with minimum luminous flux of 120-125lm/W. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 6KV. Luminaire dimension :634mm diameter x 676mm height. CE & BIS Certified. The manufacturer shall have in house NABL certified testing facility for street light luminaire viz- LM-79, IP test, IK test. Oven to bake coating Required luminaire. The EIC will visit the plant to ascertain the required testing equipment s, plant and machinery. Following test reports will be required with the material. LM-79 IP-65/66 IK-09 LM-80 FOR LED BIS OF DRIVER BIS OF STREET LIGHT C | 52.00 | NOS |
| 4 | Supply of Laser cut designer bollard Input power : 12-25W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire made of extruded aluminium tube, aluminium components and external non corrosive stainless steel fasteners. Inner toughened glass. Bespoke laser cutting design. Pressure die cast aluminium mounting plate 167mm diameter x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110. The base plate have a cable entry hole of 75mm dia at the center. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP65. Mechanical resistance IK10. Pure polyester powder coated RAL 9004 Black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 6500K. Colour rendering index (CRI)90. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 3KV. Luminaire dimension : 166mm diameter x 1500mm height. CE & BIS Certified. Inhouse NABL accredited lab | 20.00 | NOS |
| 5 | Supply of - Wall Bracket Input power : 60W LED e Pole top luminaire. Type III (Asymmetrical light distribution). Luminaire made of extruded aluminium alloy (grade 6063) of high corrosion resistance. Polycarbonate optical lens. Pressure die cast aluminium mounting base for surface mounting on wall. All external screws are made of stainless steel. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated RAL 9004 Black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. LED module with expected service life of at least 60,000 operating hours Minimum lumnnous flux 120lm/W @4000K. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 6KV. Luminaire dimension : 600mm length x 120mm width x 80mm height. CE & BIS Certified. Inhouse NABL accredited lab. | 20.00 | NOS |
