Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5026057 |
|---|---|
| Organisation Name | Indian Institute Of Technology |
| Tender Brief | Annual Repair And Maintenance of Public Health Services At Iit Delhi |
| Last Date For Submission | 27th Jul, 2026 |
| Opening Date | 28 Jul, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 90820.00 |
| Estimated Cost | 4540982.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling of wall tiles including base plaster of any mix and thickness including the disposal of malba/debris for all lead and lifts, all complete as per the direction of the Engineer-In-Charge. | 535.00 | Sqm |
| 2 | Removing the sticky mortar layer by grinding the top surface of the RCC wall/floor without damaging the existing surface by using a Hand/machine Grinder, including using water jet, and the disposal of debris for all lead and lifts, all complete as per the direction of the Engineer-In-Charge. | 535.00 | Sqm |
| 3 | Fibre Reinforced Patch Repair Mortar Supply and apply a pre-batched one component polymer modified cementitious,Fiber Reinforced, dual shrinkage compensated, patch repair mortar with thickness upto 40mm. Product: SikaMonoTop -122 F Bulk Density: apox 1.3 Kg./l at 27 C. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; Tensile strength in flexure >= 9N/ mm2 (28 days) according to EN196-1.Tensile Adhesion strength >= 12N/ mm2 (28 days) according to ASTM C 882, Pot Life : 40 Min. | 80.00 | Sqm |
| 4 | Drilling and fixing injection packers in RC members including, Drilling Holes: Drilling 14 mm dia., D/2 mm deep holes in structural members at the intervals of D mm c/c horizontally and D mm c/c vertically in staggered manner at an angle of 45 degree or as per recommendation of engineer in charge.(D is the section thickness) Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. Fixing of Packers: Insert 12 mm dia., 50~75 mm long NRV packers in cleaned holes with structural grade epoxy adhesive like Sikadur-31 or equivalent. Cutting of Packers: Cut the packers by cut of wheel after completion of grouting without damaging structural elements. | 734.00 | Nos. |
| 5 | Epoxy Injection for Wet / Underwater Supply and apply a solvent-free, 2 component moisture insensitive, high early strength liquid, based on epoxy resin suitable for underwater condtions. Product: Sikadur -53 (UF) Density : 1.1 Kg./l Product requirements: compressive strength>=40 N/mm2 (1 days) and >= 50 N/mm2 (7 days) according to ASTM D 579; Tensile Adhesion strength > 8 N/mm2 (14 days) according to ASTM C 882; tensile strength >=30 as per ISO527. | 132.00 | Kg |
6 Days Left