Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4998634 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Maintenance Of Street Lighting On Pwd Roads Under West Electrical Division, Pwd, New Delhi During 2025-26. (sh- Supply, Installation, Testing and Commissioning Of Solar Tree At Various Roundabouts And Important Stretches In West Electrical Division New Delhi). |
| Last Date For Submission | 28th Jul, 2026 |
| Opening Date | 28 Jul, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 160814.00 |
| Estimated Cost | 8040682.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supplying installation testing and commissioning of Hybrid type Solar Tree based on Solar Photo Voltaic Power Generation system conforming to MNRE specification (as amended up to date), consisting of Mono/Poly Crystalline silicon solar cells. Solar photovoltaic Module. The trunk of solar tree shall be made out of minimum 150 mm dia SS tubular pole (304 grade) of height not less than 3.0 mtr fixed on MS base plate of size minimum 600 mm x 600 mm x 12 mm thick fixed on suitable strength CC foundation in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) ( as per Manufacture standards) with branches made out of 40 mm dia suitable thickness S.S. pipe approximately 1.0 mtr length aesthetically connected to base pipe (trunk) on suitable size foundation. The height of the solar tree should not be less than 4.0 mtr from the base of the solar tree trunk. The Nos of leaves 10 with minimum length approximate 4 feet, Solar PV Module 12Volts, 100Watts -10 Nos. Battery LiPo4 12 Volts, 50Ah -10 Nos. with Module Mounting Structure, 10 watts Solar LED leave panel Light - 10 Nos, Solar Charge Controller 12 Volts, 6 Ampers-10 Nos. Hybrid Solution-AC/DC System wiring (upto 50m) (2 x 4 sq.mm flexible round copper cable) i/c all accessories, excavation, refilling, earthing, connections complete etc. as required. (before execution of work the drawing shall got approved from Engineer-incharge.) | 4.00 | Each |
| 2 | Supplying installation testing and commissioning of Hybrid type Solar Tree as per approved drawing and design based on Solar Photo Voltaic Power Generation system conforming to MNRE specification (as amended up to date), consisting of Mono/Poly Crystalline silicon solar cells. Solar photovoltaic Module confirming to IS 14286/IEC 1215, IS/IEC 61730-part-1, IS/IEC 61730- Part-2. The trunk of solar tree shall be made out of 200mm dia SS tubular pole (304 grade) of height not less than 4.0 mtr fixed on MS base plate of size minimum 600mm x 600mm x 20mm thick fixed on CC foundation in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) ( as per Manufacture standards) with branches made out of 40 mm dia 2 mm thick S.S. pipe approximately 1.0 mtr length aesthetically connected to base pipe (trunk). The height of the solar tree should not be less than 5.0 mtr from the base of the solar tree trunk. The nos of leaves 10 with minimum length approximate 4 feet complete with SITC of following accessories, excavation, refilling, earthing, connections excavation refilling earthing connection complete etc. as required. Solar PV Module 12Volts, 100Watts -10 Nos. Battery LiPo4 12 Volts, 250Ah -10Nos. Module Mounting Structure with 4 Meters SS pole -1Set, 65 Watts Solar LED leaves panel Light -10Nos, Solar Charge Controller 650VA/12V-10 Nos. Hybrid Solution-AC/DC System wiring (Up to 50 mtr.) (2 x 4 sq.mm flexible round copper cable) i/c all accessories, excavation, refilling, earthing, connections complete etc. as required. (before execution of work the drawing shall got approved from Engineer-incharge.) | 2.00 | Each |
| 3 | Supplying of following size XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade etc as required. | ||
| 4 | 3 x 10 Sqmm | 160.00 | Mtr |
| 5 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
3 Days Left