Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4096174 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Operation And Maintenance Of Street Lights And High Masts I/c Monitoring Of Street Light At Various Locations In North East Area Under Sub Division-i/m-2511 Delhi |
| Last Date For Submission | 2nd May, 2026 |
| Opening Date | 02 May, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 76089.00 |
| Estimated Cost | 3804436.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy 120 <135 lm/Watt) Supplying of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F. 0.95, IP-66,IK-10, CRI >70, under voltage and over voltage rotection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of nitial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000 K / 4000 K / 5700 K /6500 K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 120 <135 m/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- harge as per requirement. (Thermal management: heat sink of luminium housing such that LED junction temperature shall ot rise above 90 C). | ||
| 2 | 120 watt | 50.000 | Each |
| 3 | 150 Watt | 200.000 | Each |
| 4 | 200 Watt | 120.000 | Each |
| 5 | LED Flood Light, powder coated pressure die cast aluminium System lumen efficacy 120 and <135 lm/Watt). Supplying of Flood light, powder coated pressure die cast aluminium body with uilt in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, nternal surge protection of 5 KV L,N,E as per IEC 61000-4-5, river efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F. 0.95, IP-66,IK-10, CRI >70, under voltage and over voltage rotection, EMI-EMC as per CISPR-15, lenses for beam angle 30 eg-120deg as per the application and the project requirement, uitable tilt able fitting, life time (LED, Driver & electrical ircuitry) of minimum 50000 Burning Hours with 70% of nitial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000 K / 4000 K / 700 K /6500 K (As per ANSI Bin), SDCM(Standard Deviation olour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant IS standard complete in all respect i/c external connections ith 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum year OEM warranty. System lumen efficacy 120 and <135 lm/Watt output . LM79 & LM80 Test report and all testing equired for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90 C). |
2 Days Left