Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4391929 |
|---|---|
| Organisation Name | Delhi Development Authority |
| Tender Brief | Corrigendum : Providing And Laying 250 Mm To 1600 Mm Nominal Dia Internal And Peripheral Sewer Line In Kirari Group Of Colonies Under Rohini Catchment Area, In Delhi And Construction Of Wwps At Prem Nagar, Bhagya Vihar And Pratap Vihar Including Rising Mains. |
| Last Date For Submission | 10th Jun, 2026 |
| Opening Date | 11 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 521607.00 |
| Estimated Cost | 26080336.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Earth work in excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting within site of work including all lifts and leads. a) All kinds of soil | 4388.000 | cum |
| 2 | Compacting original ground supporting sub grade, loosening of the ground up to a level of 500 mm below the subgrade level, watered graded and compacting in layer to meet the requirement of as per table 300-2 of MORTH specification. (The rate shall include excavation of roadway and using the excavated soil in preparation of sub grade to ensure that everywhere 500 mm subgrade is prepared afresh with soil having minimum CBR value 8 %. If soil of CBR 8% is not availble then the agency will do appropriate stabilization as per IRC-SP-89-2010 as approved by Engineer-in-charge and nothing extra shall be paid on this account and it will be incidental to work.(Camber to be maintained as per existing road) | 6500.000 | sqm |
| 3 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | ||
| 4 | a) With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 | 975.000 | cum |
| 5 | b) With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 | 975.000 | cum |
4 Days Left