| 1 | Supplying, Installation, Testing and Commissioning of PTZ (Pan, Tilt and Zoom) IP IR Camera having following specifications and features etc.:
PTZ (Pan, Tilt and Zoom) IP IR Camera having following specifications and features etc.: 1. IP IR PTZ Camera: Motorized PAN TILT ZOOM with IR
2. Image Sensor: 1/2.8" or better progressive Scan CMOS
3. Signal System: PAL/NTSC
4. Minimum Illumination: 0.008 Lux@F1.6, AGC ON, 0 Lux with IR, or better
5. Imaging: 1/1s to 1/30000s, Auto Gain Control, White Balance-Auto, Back Light Compensation, Image Rotation, Multi Zone Privacy Masking (Upto 24 Area), HLC, Defog, Region Of Interest and EIS features.
6. On Screen Display: Camera should display Camera title, Date & Time In live & recorded video both
7. Signal to Noise Ratio: > 50 dB 8. Event Notification: Through Relays, E-Mails or FTP
9. Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR LED's with effective distance. The camera should have IR LED's and cover distance up to 300 meter or above
10. Auto Tracking: The camera should be equipped with Deep-learning-based auto tracking function using simultaneously all of the panning, tilting and zooming should be available. When a motion is detected in a registered monitoring area, the camera should track the motion (object) and capture it.
11. Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event buffering.
12. Presets: 300 Presets
13. Video Compression (Minimum): H.265 or better, H.264, Audio:- G.711U/A, G.711MU, G.726, AAC, G.723
14. Wide Dynamic Range: WDR (120dB or more), HLC & BLC
15. Digital Noise Reduction: DNR (2D+3D) On/Off
16. Image Setting: Rotate Mode, ROI, EIS, Defog, saturation, brightness, contrast, sharpness adjustable through client software or web browser
17. Profile Management: User configuration Import, export. 18) Cyber Security: Configuration encryption, AES 256-bit Encryption, Digest account lockout, video encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution.
19) Onboard Storage: Camera should support built in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB Memory.2 MP IP IR motorized PTZ @ 25/30fps or better camera, Triple streaming, configurable on resolution Main stream: 1080p@25/30 fps Sub 1.1 streame :1080p@25/30 fps & D1@26/30 fps or better, varifocal lens 4.3-137 mm or better with automatic & manual Focus Adjustment provisions, 22x Optical zoom and 12x Digital zoom with angle of view 57"-2.4", PAN Travel: Pan: 0 -360 endless, Manual Pan: 260 /s, Preset: 300" fs. Tilt Travel: Tilt: -20 to 90 , auto flip 180", Manual Tilt: 120 /s, Preset: 200 /s. | 6 | Each |
| 2 | Supplying, Installation, Testing and commissioning of following capacity & port Layer 2 Indoor Network Switch having features and specifications etc, as mentioned here under: Minimum 8X RJ-45 Gigabit Ethemet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, BK MAC table, Internal dual AC Power supply with operating temperature of -5 C to +50 C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, QOS: 8 Queue per port, WRR, IPv4/IPv6 Interface: minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Access Control 2 entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1, v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, ROHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.: 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+ | 6 | Each |
| 3 | SITC IP65 box (without PoE switches) of dimention 310mmX160mmX140 mm on pole or wall with suitable arrangement for 3support/installation of 8 port Giga PoE switch and 1 nos. 15/16 amp modular switch socket set. | 6 | Each |
| 4 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. | 360 | Meter |
| 5 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category & Unshielded Twisted Pair, 4 pair should be complied as per ULJETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range: -6 to +60 C, Bending Radius: <4X Cable Diameter at -5 C 1 C and Pulling Force: 11.5Kg etc. complete as required. 1 Run of Cable.
| 120 | Meter |
