Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3906130 |
|---|---|
| Organisation Name | Delhi Development Authority |
| Tender Brief | Corrigendum : Repair And Maintenance Of 7 Nos Shops, 1 Office And 6 Stall At Ishwar Nagar, Sarai Jullena And Pkt-j, F And G, N And M Sarita Vihar New Delhi. |
| Last Date For Submission | 18th Apr, 2026 |
| Opening Date | 20 Apr, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 41315.00 |
| Estimated Cost | 2065755.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supplying and fixing of rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to 1S: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. (a) 80x1.20 mm M.S. laths with 1.20 mm thick top cover | 59.00 | sqm |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | 118.00 | sqm |
| 3 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. (a) 25mm average thickness. | 178.00 | sqm |
| 4 | (b) 50 mm average thickness. | 63.00 | sqm |
| 5 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. (a) Bars upto 12 mm diameter | 257.00 | metre |
4 Days Left