Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4888036 |
|---|---|
| Organisation Name | Delhi Development Authority |
| Tender Brief | Corrigendum : Sh-supply And Replacement Of Street Light Etc At 30 Mtr Wide Road, 24 M Wide Road And 20 M Wide Road At Dheerpur Project. |
| Last Date For Submission | 20th Jul, 2026 |
| Opening Date | 21 Jul, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 4038.00 |
| Estimated Cost | 201915.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt) Supplying, Replacement, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F. 0.95, IP-66,IK-10, CRI >70 , under voltage and over voltage protection,EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver& electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM- 21-11 report , CCT 3000 K / 4000 K / 5700 K /6500 K (As per ANSI Bin) , DCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90 C) i/c dismantling of existing street light. 120 watt. | 45 | Each |
| 2 | Supplying and drawing following sizes of PVC insulated PVC sheathed copper conductor multicore cable from cable termination connector to the fitting i/c connection etc. as reqd.a) 3 x 1.5 sq.mm | 270 | Mtr. |
5 Days Left