Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4940703 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Building No P-19 And P-21 (jco Md Accn) At Ihq Of Mod Army Tpt Unit Asc Under Ge New Delhi |
| Last Date For Submission | 8th Aug, 2026 |
| Opening Date | 10 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 97090.00 |
| Estimated Cost | 0.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | B&R PORTION: M&L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. | 250.00 | Sqm |
| 2 | M&L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. | 110.00 | RM |
| 3 | Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster including removing the demolition material out side the MOD land complete all as specified and directed. | 22.50 | Cum |
| 4 | M&L for Cleaned the surface by using vacuum and ensure the surface is free from laitance, loose or friable materials, debris etc. Ensure the substrate has properly cured and the concrete is profile free, no ridges or troughs. Surface profile of CSP 4 or CSP 5 is preferred substrate. If concrete surface found to be defective with pinholes, bug roles, honeycombs etc., it must be repaired using scratch coat prepare by mixing Aquaseal primer and 4 mm down silica sand at ratio of 1:1 by weight. Apply the scratch coat by using suitable spatula/squeeze to get level surface for the upcoming primer complete all as specified and directed. | 300.00 | Sqm |
| 5 | M&L for Angle Fillets/Vata/Coving must provide at size of 50 x 50 mm on all vertical upstands & junctions /corners with cement sand Polymer modified mortar all around the periphery. Alternatively, all vertical up-stands and junctions, wall floor joints, mechanical installation shall be treated with Joint Tape as recommend in technical data sheet and Mechanical installations complete all as specified and directed. | 22.00 | Each |
15 Days Left