Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3908401 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Roof Seepage, Seepage Of Wall And Weather Proof Apex Painting Alongwith Other Connected Works To Building No P-17, P-55, P 68, P-06, P-07, P-04, P-86, P-22 And P-23 Of Ihq Of Mod (army) Tpt Unit Under Ge New Delhi |
| Last Date For Submission | 23rd Apr, 2026 |
| Opening Date | 25 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 95138.00 |
| Estimated Cost | 0.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. | 497.00 | Sqm |
| 2 | Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster including removing the demolition material out side the MOD land complete all as specified and directed. | 146.50 | Cum |
| 3 | M&L for Cleaned the surface by using vacuum and ensure the surface is free from laitance, loose or friable materials, debris etc. Ensure the substrate has properly cured and the concrete is profile free, no ridges or troughs. Surface profile of CSP 4 or CSP 5 is preferred substrate. If concrete surface found to be defective with pinholes, bug roles, honeycombs etc., it must be repaired using scratch coat prepare by mixing Aquaseal primer and 4 mm down silica sand at ratio of 1:1 by weight. Apply the scratch coat by using suitable spatula/squeeze to get level surface for the upcoming primer complete all as specified and directed. | 1954.50 | Sqm |
| 4 | M&L for Angle Fillets/Vata/Coving must provide at size of 50 x 50 mm on all vertical upstands & junctions /corners with cement sand Polymer modified mortar all around the periphery. Alternatively, all vertical up-stands and junctions, wall floor joints, mechanical installation shall be treated with Joint Tape as recommend in technical data sheet and Mechanical installations complete all as specified and directed. | 300.00 | Each |
| 5 | M&L for the following:- (a) Clean the identified crack and remove drilling dust before placing the nozzle. Seal and pack the nozzle with fast setting Instant Leak Plug compound. Injection of cement slurry admixed with admixture by using 40PSI grout pump. plasticizing grout additive the product is to be dispensed in water & added to 50 kg of cement at a water cement ratio of 0.4-0 0.45. The mixture thus batched is to be used for injection grouting. admixture shall have a bulk density of 0.7-0.8 gm/cc complete all as specified and directed by Engr in charge. (b) Providing & applying of High Solid Content, Cold Liquid- Applied Elastomeric Water Proofing Membrane using Brush/ roller / airless spray. Application includes mixing & application of Aquaseal primer using suitable brush/roller coverage @ 150- 200 ml/m2, allow the primer to become tack free approx. for 3-4 hrs depending upon ambient temperature followed by application to form a minimum system thickness of 1.5mm in three coats with a total consumption is 2.5Kg/m . Allow the membrane to air cure for 7 days before any activity over it. The PU membrane shall be terminated 300mm above FFL. The Waterproofing material shall have Solids > 85%, Tensile strength > 2 MPa as per ASTM D 412, Elongation > 400% as per ASTM C 1305, crack bridging up to 3.2mm, Shore A Hardness > 50 as per ASTM D 2240, Adhesion to concrete > 1.5Mpa as per ASTM D 903, Water vapor permeability > 14gm / m2 / day complete all as specified and directed by Engr in charge. Make: Ms Asian Paints Ltd/ Ms Berger Paints India Ltd/ Ms STP Ltd/ Ms Sika India Pvt Ltd/ Ms Pidilite Industries Ltd | 1954.50 | Sqm |
6 Days Left