Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4370720 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Strengthening Of Pusa Road From Pusa Round About To Dayal Chowk, Pusa Institute (iari) Internal Road From Ratanpuri Chowk To Pusa Employment Exchange Gate And O.p. Bharti Marg, Improvement Of Riding Surface Of Guru Ravi Dass Marg And Prof. Ram Nath.. |
| Last Date For Submission | 4th Jun, 2026 |
| Opening Date | 04 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 811454.00 |
| Estimated Cost | 40572707.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength and durability; including laying at site curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. All Works upto plinth level: Concrete of M-25 grade with minimum cement content of 300kg/cum. Note: Cement content considered in this item is minimum @300kg/cum. Nothing extra shall be payable on account of design mix specify more than @300kg/cum | 456.0000 | Cum |
| 2 | Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom With medium setting bitumen emulsion 2.1) On bituminous surface @ 0.25kg/sqm | 48900.0000 | sqm |
| 3 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retroreflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | 760.0000 | Each |
| 4 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | 2086.0000 | Sqm |
| 5 | Less for Cost Index@ -0.09% on DSR items | 0.0900 | Nos |
4 Days Left