Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4152591 |
|---|---|
| Organisation Name | HLL Lifecare Limited |
| Tender Brief | Corrigendum : Supply, Installation, Testing And Commissioning Of 125 Kva Diesel Generator Set And Allied Works At Sewa Bharathi Sewa Dham Vidhya Mandir, New Delhi |
| Last Date For Submission | 15th May, 2026 |
| Opening Date | 16 May, 2026 |
| Document Cost | 2950.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 1500000.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | ELECTRICAL WORKS | ||
| 2 | Supply, installation, testing and commissioning of 125 kVA silent Diesel Generator Set, conforming to CPCB-IV+ norms, suitable for continuous duty. The DG set shall deliver rated output at 415 V, 50 Hz, 3-phase, 4-wire, 0.8 PF, with 1500 RPM, water-cooled diesel engine and brushless synchronous alternator with Class H insulation and AVR.The DG set shall be mounted on a rigid MS skid with anti-vibration mounts and enclosed in a weatherproof acoustic canopy limiting noise to 75 dB(A) at 1 m. It shall be provided with inbuilt control panel with digital metering, 250A AMF Panel, complete safety protections. Scope includes base frame fuel tank, batteries, charger,control cable, exhaust system with silencer, transportation, installation, testing and commissioning. The cost for conducting trial run for 4 hours and all testing and commissioning activities shall be borne by contractor. | 1 | Set |
| 3 | Supply, installation, testing and commissioning of 250A, 415V, 3-phase, 4-pole (TPN) changeover switch suitable for switching between two power sources (EB/DG), with AC-23A utilization category, complete with break-before-make mechanism, manual operation, and short circuit withstand capacity min. 25 kA. The switch shall be housed in a powder-coated CRCA enclosure (IP54) with door interlock, position indicator, and RYB indication lamps for both sources, including all internal wiring, control components, and accessories etc | 1 | Set |
| 4 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 150 sq mm | 40 | Mtr |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 1/2 X 150 sq. mm (50mm) | 2 | Set |
6 Days Left