Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4449283 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Smart Periodical Service And Other Connected Works In Certain Otm Accn In The Area Of Age B/r-i Under Ge (west) Delhi Cantt-10 |
| Last Date For Submission | 18th Jun, 2026 |
| Opening Date | 20 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 97000.00 |
| Estimated Cost | 4850000.00 |
| City | Delhi |
|---|---|
| State | Delhi |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | NOTE FOR ALL PAINTING AND WATER PROOFING ITEMS:- The following precautionary measures shall be ensured by the contractor before and during execution of the work:- (i) All the painting works and water proofing works shall be got executed through original material manufacturing company and their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company and their authorised applicator alongwith performance guarantee otherwise recovery of Rs 2000.00 per week will be made from the contractors dues from the date of commencement of work. (ii) Submission of MOU will be mandatery requirement before execution of work as the entire work shall be executed with the approved firm only. (iii) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor,glasses and joinery. (iv) The work shall be executed in multy storey buildings up to four storey height and cost of suitable scaffolding shall be deemed to be included in quoted rates by the tenderer. (v) The work will be carried out in following steps as appended below:- | ||
| 2 | M&L for complete removal of old existing treatment of wall(external/internal) and ceiling finished using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500,sanding pad of 320 grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete all as specified and directed. Note :( height of building up to 4 Storey) | 15500.00 | sqm |
| 3 | M&L for applying waterproof cement based putty @0.8 kg(undiluted) per sq mtr. Of average thickness 1-1.5mm in one coats on prepared wall(external/internal) and ceiling surfaces as per sr item No 1.00 above in the following steps:- (i) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent. (ii) Mix the putty powder @ 0.8 kg/sqm by adding 35to40% water by volume or as per approved manufacturer's instruction and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5to10 minutes. (iii) Apply the first coat of the prepared mix with the help of fully automatic airless spary machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration and allow 6-8 hrs to dry the putty surface. (iv) Apply the second coat of the prepared mix with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration. (v) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer complete all as specified and directed. Note:-Primer shall be measured and paid seperately under relevant item. | 5000.00 | sqm |
| 4 | M&L for applying one coat of acrylic water based exterior grade/interior grade primer @0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI on prepared and wall (external) surfaces as per srl item no.3.0 above.Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 5000.00 | sqm |
| 5 | M&L for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint @1.8 ltrs/10sqm(undiluted) or as per approved manufacturer's instruction over prepared and primed surface of external wall as per srl item No. 4.0 above.Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. Make:-Apex Ultima Protex Asian paints/Nerolac excel top guard/Berger weather coat long life 10 prepared by item No 2 complete all as specified and directed. Note :( height of building up to 4 Storey) | 5000.00 | Sqm |
18 Days Left