Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4035505 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Sh- Providing And Laying 30 Mm Thick Bituminous Concrete Laying With Paver Finisher And Hot Thermoplastic Compond In Km 0/000 To 1/000 And 2/000 To 2/210 |
| Last Date For Submission | 23rd Apr, 2026 |
| Opening Date | 24 Apr, 2026 |
| Document Cost | 1500.00 |
|---|---|
| EMD | 52700.00 |
| Estimated Cost | 2633450.00 |
| City | Dharamshala |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a one layer composite construction of crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm as per Technical Specification Clause 505, as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 296.00 | Per Square meter |
| 2 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kgs (Zero twenty five into Zero decimal to three Zero kilogram) per square metre on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 5740.80 | Per Square meter |
| 3 | Providing and laying 30mm (Thirty milimetres) thick bituminous concrete with 100-120 TPH batch type HMP (Hot Mix Plant) producing an average output of 75 tonnes (Seventy five) tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-10 (Viscosity grade-Ten) @ 5.4% to 5.6% (Five point Four to Five point Six) percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 509 complete in all respect and as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 172.22 | Per Cubic Meter |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes, as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 242.00 | Per Square meter |
5 Days Left