Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5017191 |
|---|---|
| Organisation Name | Dharamshala Smart City Limited |
| Tender Brief | Supply, Installation, Testing And Commissioning Of Led Street Lighting And Decorative Lighting At Charan Khad Riverfront, Road And Park, Dharamshala, Including Comprehensive Operation And Maintenance For Three (3) Years |
| Last Date For Submission | 29th Jul, 2026 |
| Opening Date | 29 Jul, 2026 |
| Document Cost | 10000.00 |
|---|---|
| EMD | 210300.00 |
| Estimated Cost | 10511006.00 |
| City | Dharamshala |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply, Installation, Testing and Commissioning (SITC) of outdoor-type Centralized Control and Monitoring System (Smart Control Feeder Panel / CCMS Panel), complete with enclosure, incomer and outgoing switchgear, power contactors, metering instruments, RTU/gateway with optical-fibre and SIM communication, smart energy meter, surge protection, internal wiring, earthing and all accessories, strictly as per Clause 2.2.7 and the approved CCMS Wiring Diagram. Make as approved by DSCL and as directed by the Engineer-in-Charge. | 2 | Each |
| 2 | Supply and fixing of single-pole miniature circuit breaker (MCB), 6 A to 32 A rating, 240 V, 10 kA breaking capacity, C curve, in the existing MCB distribution board, complete with connections as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. | 125 | Each |
| 3 | Providing, laying and fixing of 1100 V grade aluminium-conductor, XLPE-insulated, PVC-sheathed, armoured power cable of size 3.5 Core 25 sq.mm, on surface or in duct, for the CCMS panel feed, including jointing kits and aluminium lugs, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. | 50 | R.Mtr. |
| 4 | Providing, laying and fixing of 1100 V grade aluminium-conductor, XLPE-insulated, PVC-sheathed, armoured power cable of size 4 Core 10 sq.mm for the overhead and underground cabling system, including jointing kits and aluminium lugs, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. | 2500 | R.Mtr. |
| 5 | Supply and laying of 63 mm dia (OD 70 mm / ID 58 mm) ISI-marked DWC pipe conforming to IS 14930 Part II, with all accessories (sockets, bends, couplers), including cutting and jointing, laid direct in ground 75 cm below ground level, including excavation and refilling but excluding sand cushioning and protective covering, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. | 300 | Meter |
8 Days Left