Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4368405 |
|---|---|
| Organisation Name | Airports Authority Of India |
| Tender Brief | Corrigendum : Execution Of Miscellaneous Glf Works At Dibrugarh Airport. |
| Last Date For Submission | 22nd Jun, 2026 |
| Opening Date | 24 Jun, 2026 |
| Document Cost | 1180.00 |
|---|---|
| EMD | 581570.00 |
| Estimated Cost | 19385665.00 |
| City | Dibrugarh |
|---|---|
| State | Assam |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply of each set of Elevated Type Uni Directional Runway Guard Light Fixture Consisting of 1 pair of yellow lights together, flashing with LED lamp of series circuit 2.8 - 6.6 amps current, Yellow glass(if required), 1 x 2-pole secondary plug, including frangible collar, stand and with all standard accessories ready for site installation as required. | 10.00 | Set |
| 2 | Supply of Inset type Uni directional Runway Threshold light fixture showing green & meeting ICAO requirements LED lamp of series circuit 2.8 - 6.6 amps current, control driver with suitable shallow base with side/bottom hole entry and matching body of the fitting, inner body and outer cover made of die cast aluminium complete with connected heat resistant accessories, prism assembly, optical assembly, "O" ring seal, pressure relief test plug, lense(s), two-pole secondary plug, hardware and all standard accessories and ready for site installation as required and as per the enclosed particular specifications. | 40.00 | Each |
| 3 | Supply of Inset type Uni directional Runway End light fixture showing red & meeting ICAO requirements LED lamp of series circuit 2.8 - 6.6 amps current, control driver with suitable shallow base with side/bottom hole entry and matching body of the fitting, inner body and outer cover made of die cast aluminium complete with connected heat resistant accessories, prism assembly, optical assembly, "O" ring seal, pressure relief test plug, lense(s), two-pole secondary plug, hardware and all standard accessories and ready for site installation as required and as per the enclosed particular specifications. | 36.00 | Each |
| 4 | Supply and Installation of Solar operated Road Holding Lights (as per ICAO/DGCA-CAR) comprising of a high intesity flashing red light having flashing frequency between 30 to 60 flashes per minute with suitable rated solar panel and SMF batteries along with water tight(outdoor type) enclosure, to provide 24 hrs flashing with and to be installed using suitable size frangible coupling pole by necessary excavation, cement concrete basement etc., as per direction of Engineer-In-Charge (Equivalent to AMA make AM-TL-S-BLK-A-300-12V) | 15.00 | Each |
| 5 | Supply of C.I. Isolating Transformer housing box,water tight round type,metal container of outside size 330mm height 450mm made of 10mm thick cast iron moulding suitable to receive a light fitting base plate on the top and underground housing associated with transformer power cable and having a clear hole centre at one side surface centre 75mm above bottom surface suitable to receive one of 50mm dia "B" class GI pipe(Double Hole type) and including check nuts as required and another hole at 175mm from the bottom of the CI Box to receive one no. 15mm dia "B" class GI pipe and check nut as required.The box should have two SS earth bolts of M10 x 30mm tapped inside near the hole (4" away from the hole centre) and having a drain hole at the bottom suitably tapped to receive 15mm dia "B" class GI pipe and having clear opening of 220 mm at the top surface and 6 nos. M10 tapped hole at the hole centre 260 mm to receive fitting base plate and bolts as required as per the drawings. | 10.00 | Each |
9 Days Left