Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5026137 |
|---|---|
| Organisation Name | Border Roads Organisation |
| Tender Brief | Resurf With P/l Of Bc 30 Mm, Bm 50 Mm Thick, Tack Coat And Berm Filling And Thermoplastic Paint For Edge Marking Bet Km 7.000 And Km 41.930 On Road Mon-lungwa Under 100 Rcc/15 Brtf/project Sewak In Nagaland State |
| Last Date For Submission | 10th Aug, 2026 |
| Opening Date | 12 Aug, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 764000.00 |
| Estimated Cost | 87718500.00 |
| City | Dimapur |
|---|---|
| State | Nagaland |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and applying of Tack Coat by using suitable low viscosity paving bitumen of bitumen of appropriate grade not less than @2.5 Kg/10 Sqm conforming to table 505-5 of MORT&H specifications for Road and Bridge Works (Fifth Revision). on existing bituminous surface after cleaning all complete as per Clause 503 of MoRT&H Specifications for Road and Bridge Works (5th Revision) | 155297.00 | Sqm |
| 2 | Providing and Mixing of stone aggregate in Hot Mix Plant, laying mix BC by paver laying and compacted to BC 30 mm thick layer Pre-coated aggregate physical requirement/grading/mix composition confirming to Table: 500-16 and aggregates satisfying the physical requirement of table 500-17 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 5.4% bitumen (bitumen of appropriate grade as per particular specifications Para 8.2.1) requirement as per Clause 507 of MoRT&H Specifications for Road and Bridge Works (5th Revision) for resurfacing work.. | 111038.00 | Sqm |
| 3 | Providing and Mixing of stone aggregate in Hot Mix Plant, laying and compacted to BM 50 mm thick layer Pre-coated aggregate physical requirement/grading/mix composition conforming to Table: 500-7 and aggregates satisfying the physical requirement of table 500-06 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 3.4% bitumen (bitumen of appropriate grade as per particular specifications Para 3.2.1) by weight of total mix complete in all respect and all as specified and directed by Engineer-in-Charge. | 44259.00 | Sqm |
| 4 | Road Marking with Thermoplastic Paint (2.50 mm thick) conforming to Section 803 of MoRT&H Specifications for Road and Bridge Works (5th Revision) and IRC:35-2015 | 5384.00 | Sqm |
| 5 | Earth work in berm filling with selected earth free from roots etc spreading in layers not exceeding 30 cm including watering, rolling & finishing to required slope conforming to clause 305 of MORT&H Specifications for Road and Bridge Works (Fifth Revision) and notes of Sch A and as directed & approved by Engr-In-Charge | 1454.00 | Cum |
20 Days Left