Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4882106 |
|---|---|
| Organisation Name | Industries And Commerce Department |
| Tender Brief | Corrigendum : Construction Of Operator Office Of Compressor Station Inside Within Existing Workshop Including Partitioning Doors Windows Glazing And False Ceiling Complete As Per Specifications For Dnp Limited At Madhuban Duliajan |
| Last Date For Submission | 22nd Jul, 2026 |
| Opening Date | 24 Jul, 2026 |
| Document Cost | 200.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 0.00 |
| City | Duliajan |
|---|---|
| State | Assam |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Civil Part | ||
| 2 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture s specification and direction of engineer in charge all complete. Partition Specification: 66 mm overall thickness partition using 8 mm thick one side and 12mm other side, double skin multipurpose cement board Type-B, Category-III as per IS: 14862 : 2000 reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) with suitable fibre cement screws | 144.450 | sqm |
| 3 | Float glass panes of 5mm thickness(Weight not less than 12.50 kg/m2) | 9.570 | sqm |
| 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded builtup tubular sections/appropiate Z sections and other sections of approved make cinforming to IS 733 and IS 1285, fixing with dash fastners of required dia and size, including necessary filling up the gaps at junctions i.e., at top, bottom and sides with required EPDM rubber/neoprene gaskate etc. Aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically wherever required cleat angle, aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge.(Glazing, panelling and dash fastners to be paid for separately) | 11.117 | kg |
| 5 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | 5.000 | Each |
7 Days Left