Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4032353 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Renewal Work On Dhumari Saroth Sankisa Road In Fy 2025-26 |
| Last Date For Submission | 22nd Apr, 2026 |
| Opening Date | 22 Apr, 2026 |
| Document Cost | 2354.00 |
|---|---|
| EMD | 837000.00 |
| Estimated Cost | 12744000.00 |
| City | Etah |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. I/C cost of material, labour, T&P and all Taxes but Excluding GST | 64.00 | Cum |
| 2 | Tack Coat (For Bituminous surface) Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. I/C cost of material, labour, T&P and all Taxes but Excluding GST | 27700.00 | Sqm |
| 3 | Bituminous Concrete: Grading 2 :- Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects I/C cost of material, labour, T&P and all Taxes but Excluding GST | 792.00 | Cum |
| 4 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. I/C cost of material, labour, T&P and all Taxes but Excluding GST | 740.00 | Cum |
| 5 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Required for proper completion of work as per direction by E-in-C in Edge Line, Centre Line & Zebra Crossing etc. I/C cost of material, labour, T&P and all Taxes but Excluding GST | 1030.00 | Sqm |
4 Days Left