Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4262699 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair Replacement And Day To Day Maintenance Of Internal Electrical Wiring Distribution Board Electrical Fittings And Fixtures Rewinding Of Ceiling Fan Exhaust Fan Painting Of Fan Repairing Of Geyser In Nasa Cera Sailors Inliving Accn At Ina Ezhimal |
| Last Date For Submission | 10th Jun, 2026 |
| Opening Date | 16 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 96000.00 |
| Estimated Cost | 4800000.00 |
| City | Ezhimala |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Note :- 1. The contractor should visit at site before quoating the tender to know the working condition of the station. 2. All requisite safety measures adopted by contractor on site. 3. The contractor shall provide and deploy sufficient electricain ( as aproved by GE / Engineer-in-Charge) shall report at 9:00Hrs to JE E/M or Engineer-in-Charge to collect the complaints card in working days and complete the same complaints within 24Hrs. 4. The complaints shall be rectified within 24hrs if the complaints is/are not attended or not completed within 24hrs (except repairs / replacement of major items) recovery will be done Rs. 500/- per complaint per day. 5. For Major parts like replacement of MCB DB's / MCCB DB's should be rectified within three working days, if the contractor not rectify recovery will be done Rs. 500/- per complaint per day. 6. If contractor fail to provide their electricain to attend the complaints then recovery will be done by Rs. 1000 per day. | ||
| 2 | Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete (except concealed conduit) including fittings such as switches ceiling roses, pendent, regulators, sockets, earth plug and socket etc and making good matching to the existing colour to the disturbed surface. | 160.00 | Point |
| 3 | Material and Labour colour code point wiring FRLS PVC insulated and sheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade drawn through PVC casing caping with suitable size flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting 6 Amps switch with socket on independent board including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly including making good the existing disturbed surface using wall putty and matching colour emulsion paint all directed at the site Note :- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. | ||
| 4 | (a) One Light/ fan point controlled by one switch | 60 | Point |
| 5 | (b) One 3 pin socket outlet outlet 5 Amps on the same board with other switches | 5 | Point |
6 Days Left