| 1 | SITC of 500mm long rigid architectural RGBW (W-4000K)/TuneableWH LED Linear light operating at 24V DC & housing made of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted 95 . The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumiled. The fixture shall have 25X40" beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI 280 & shall have SDCM<4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire chall have system wattage 18W Fixture must have operating temperature range of -10 C to 50 C. Frequency 50/60Hz. The luminaire shall have declared life of min 50,000 burning hours at L70850 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tuneable CCTs (3000k-6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital Gimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessorios such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, see rity, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.(Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) | 56 | Nos |
| 2 | SITC of 300mm loag rigid architectural RGBW (W-4000K)/TuneableWH LED Linear light with integral driver & housing of Extruded aluminium allcy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating fmish. The luminaire width shall be 45mm & heigh of 55mm without brackets. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the lumisaire cau be tilted +95 . The luminaire shall have silicon glue between optical cover & LED chamber to cusure proper IP66 protection. The luminaire shall be equipped with discrete high-power Cr e, Nichia, Osram, Lumiled. The fixture shall have 25 X40 /15 X20 /15 X15 beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI >80 & shall have SDCM 4. The fixture shall come with power & DMX cable of minimum 300mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 20W Fixture must have operating temperature range -40 C to 50 C. The fixtus shall have an integral driver with input voltage f 220-240 VAC, 50/60Hz. The luminumire shall have declared life of 50,000 burning hours at L70B50@35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The lutainaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7 million colours or Dynamic tuneable CCTs (3000k 6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate sha l be uplos led slong with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling. Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc. (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) | 16 | Nos |
| 3 | SITC of 1000mm long rigid architectural RGBW (W-4000K) Timeable WH LED Linear light operating at 24V DC & housing made of Extruded aluminium alley 6063 grade & die-cast aluminium end cape. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted 195. The luminaire shall have silicon glue between optical cover & LED chamber to ensore proper IP66 protection. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumiled. The fixture shall have 25 X40" beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI 280 & shall have SDCM<4. The fixture shall come with power & DMX cable of minimum 100mmlength. The fixtures shall be installed with have IP67 connectors. The lursinsire shall have system wattage 36W. Fixture must have operating temperature range of -10 C to 50 C. Frequency 50/60its. The huminaire shall have declared life of min 50,000 burning hours at L70B50 g 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device.The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic himeable CCTs (3000k-6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital linuming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, huminaire BIS certificate shall be uploaded along with technical bid. Complete in al: respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unduading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programining of faulty luminaires etc (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) | 46 | Nos |
| 4 | SITC of architectural RGBW (W-4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy - ADC12. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to 100. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have licos gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumiled. The fixture shali have 3 -3.5 /10 /15 /30 /45 /60 beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI 280 for white light & shall have SDCMC4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 10W. Fixture must have operating temperature range of -40 C to 50 C. The fixture shall have an integral driver wits input voltage for 220-240 VAC, 50/60Hz. The lurninaire shall have declared life of 50,000 burning hours at L70B50 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Offs. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tuneable CCTs (3000k 6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dinuming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding. Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) | 30 | Nos |
| 5 | SITC of Circular shape architectural RGBW (W-4000K) LED flood light with integral driver & housing made of Die cast aluminium alloy - ADC12. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to +90 . The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The lumin are raust have a breather gland. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumile 1. The fixture shall have 3-3.5 /10 /15 /30 /45 /60 beam angle & the leus shall be made of anti-aging & anti JV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have mininum CRI 280 for white light & shall have SDCM24. The fixture shall come with power & DMX cable of minimum 100mar length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 30W. Fixture raust have operating temperature range of -40 C to 50 C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The huminaire shall have declared life of 50,000 burning hours at L70B50 @ 35deg. The lunainaire shall have MR class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on laminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (4000K) to produce 16.7million colours or Dynamic tuneable CCTs (3000k-6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Londing/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty laminaires etc.
(Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) | 36 | Nos |
