Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4249712 |
|---|---|
| Organisation Name | Haryana State Cooperative Supply And Marketing Federation Limited |
| Tender Brief | Construction Of 5840 Mt Godown (without Roofing), E.i. Work, Cc Road, Labour Toilet, Septic Tank, Soak Pit, Inj. Well, Water Tank, Re-const Of B/wall After Dismantling Of Existing Ncp And Damaged B/wall At Hafed Complex Fatehabad Road Ratia. |
| Last Date For Submission | 22nd May, 2026 |
| Opening Date | 22 May, 2026 |
| Document Cost | 15000.00 |
|---|---|
| EMD | 598032.00 |
| Estimated Cost | 29902000.00 |
| City | Fatehabad |
|---|---|
| State | Haryana |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Item Description | ||
| 2 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | $207.420 | Per Metre |
| 3 | Supply and installation of 20W, 220V, 6500K, LED tube light. Make: Havells / Philips / Bajaj | $7.000 | Each |
| 4 | Supply and installation of 12W, 220V, 6500K, AC round shape LED bulb. Make: Havells / Philips / Bajaj | $19.000 | Each |
| 5 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt). Supplying, Installation, Testing and Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency greater than 85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 C to 50 C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%, THD less than 10% as per IEC 61000-3-2, P. F.greater than or equal to 0.95, IP-66,IK-10, CRI greater than or equal to 70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000 K / 4000 K / 5700 K /6500 K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90 C). 70 Watt. (DSR2025- 8.16.2) | $16.000 | Each |
10 Days Left