Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4963422 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Provision Of High Mast Security Light At Various Location At Fazilka Military Station |
| Last Date For Submission | 11th Aug, 2026 |
| Opening Date | 13 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 78500.00 |
| Estimated Cost | 3919800.00 |
| City | Fazilka |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply and install galvanized steel High Mast of 16 Mtrs height lighting system in two section, 3 mm section thickness, top dia not less than 150mm & bottom dia not less than 340 mm with its accessories including foundation bolts manufactured from special steel and Hot Dip Galvanised along with nuts, washers, anchor plates and templates, feeder pillar panel control and raising & lowering mechanism for integral power tool, Twin aviation Lamp etc. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3 minimum 18 km per hour. It shall also include accessories for high mast including head frame, steel wire rope (7/19 construction) double drum which is operated by motor gear mechanism with inbuilt starter, Timer and feeder piller panel, Galvanized Lantern carriage arrangement 'suitable for 08 Nos, including panel, luminaires Symmetrically & its control gear boxes and with 03 point suspension system. The mast shall have an integral power tool installed inside the base compartment for its operation. (Material construction of high mast sheet will be of BSEN 10025 / IS 5986 or equivalent) with wiring cable for luminaire connection including suitable size of foundation for 16.0 mtr high mast considering the soil bearing capacity 10 T / Sq mtr at 2 meter depth and using RCC M-25 grade (design mix) concrete with reinforcement,form work, earthwork, base above the ground with tiles complete all as per manufacturers instructions and as directed by Eng-in-charge. Note:- (a) Making of civil foundation for erection of high mast and feeder pillar panel as per manufacturer recommendation demeed to be included in the unit rate. (b) Cable of required size and length from top to bottom for connection of LED flood light an related switchgears included in above quoated rate. Make- Orient/Crompton/Bajaj and equivalent | 7.00 | Each |
| 2 | Supply and fixing LED flood light fittings with and including lamp 210W rating, separate individual peanut plated Lens housing should be made of LM6 Pressure die Cast Aluminum . Optical cover should be only Toughened Glass only, IP Protection not less than IP 66, Protection should be Class I,Product Standard IS 10322/IEC 60598, Driver Operating Voltage should be 140 V-270V, Driver Frequency 50Hz, Power Factor>0.9, Lumen output should not be less than 100 Lumen/watt and Luminaries with separate external surge protection device 4 Kv to 10 kv rating and separate connector block for termination of incoming cable connection all as specified and directed. Make- Orient/Crompton/Bajaj and equivalent | 56.00 | Each |
| 3 | Cable XLPE insulated screened PVC bedded, galvanised steel strip elect power cables 1100V grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as directed by Engr-in-Charge. | 1260.00 | RM |
| 4 | Excavation in trenches in any type od soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr in wide for laying of Cables, RCC/Steel tubular poles/stays and struts etc getting out includingtrimming sides wide forming bottom surface all as specified and directed at site. | 323.19 | Cum |
| 5 | Returning, filling in including spreading leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays, struts have been erected and tested, all as specified and directed st site. | 320.12 | Cum |
6 Days Left