Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4384685 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair To Roof Treatment With Connected Items To Md And Otm Accn In Aor Of Age B/r-i Of Ge (east) Ferozepur Cantt |
| Last Date For Submission | 19th Jun, 2026 |
| Opening Date | 26 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 76000.00 |
| Estimated Cost | 3800000.00 |
| City | FEROZEPUR |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling of brick tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified & directed. | 480.00 | Sqm |
| 2 | Demolition/taking out mud from the roofs, any thickness, including plastering and leaping etc including removing rubbish upto 500 mtr from the site, complete all as specified & directed. | 48.00 | Cum |
| 3 | Taking down of roof plasterr inciuding APP membrane on roof surface jointed & pointed in cement mortar complete all as specified & directed. | 2994.00 | Sqm |
| 4 | M&L for rendering 10 mm thick in CM (1:4) mixed with integral water proofing compound as per mfg instr over the padding concrete while still the concrete is still green, complete all as specified & directed (For roof treatment) Note:- WPC will be measured & paid seperately. | 3474.00 | Sqm |
| 5 | M&L for water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions. (iii) The whole works shall be executed by the authorised company applicator. | 3474.00 | Sqm |
6 Days Left