Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3999741 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Special Repair To Building No. P-61 Jco Md Accn In W-1 Zone Under Ge (east) Ferozepur Cantt |
| Last Date For Submission | 27th Apr, 2026 |
| Opening Date | 04 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 42960.00 |
| Estimated Cost | 2148000.00 |
| City | FEROZEPUR |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling of brick tiles or terracing tiles single layer laid on roof jointed and pointed in cement mortar complete all as specified and directed. | 85.15 | Sqm |
| 2 | Demolition of mud in roofs , any thickness, including plastering and leeping etc. complete all as specified and directed. | 9.37 | Cum |
| 3 | Roughening surfaces of old concerete floor/roof for removing old bitumen coat/any other type of treatment etc., by picking, sweeping clean and washing down with water to remove dust/dirt etc., complete all as specified and directed. | 85.15 | Sqm |
| 4 | M & L 10mm plaster in CM(1:4) finished even and smooth with using extra cement on bottom layer of batten roof with water proofing compound (in case of re placement of bottom layer tile) using coarse sand, complete all as specified and directed. | 85.15 | Sqm |
| 5 | M&L for water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions. | 95.00 | Sqm |
13 Days Left