| 1 | P&F 12 mm thk Gypsum board 600 x 600mm of approved model and make false ceiling to G.I. ultra studs in perfect level. Necessary offsets and grooves to be provided at th e junction of ceiling & walls/columns/partitions etc., Cut out for light fittings A/C grills etc. As per approved architectural drawing, Rate to include providing & fixing of necessary G.I./wooden/MS frame supports for the above fixture. G.I.frame to consist of proprietary supplied frames & as per manufacturers recommendations suspended from dash fasteners anchored to structural slab by means of G.I.angles. Gypsum board fixed with proprietary supplied fixing devices & finished. The joint between the sheets of plasterboard are to be covered with jointing paper tape and flushed with UB 888 (all purposes joi nting compound) to provide a smooth durable and professional finish. Suspension points and clips shall be able to take a minimum saf e load of 50 kgs. including making grooves at the junction of ceiling & walls/columns/partitions etc. ( GI Section - Ultra brand fr om Saint Gobain).The quoted rate shall be Flat rate and inclusive of all operations, materials, labour, tools, plants, equipment, scaffolding, transportation, loading, unloading, shifting of all items at any place, etc. and handling at all levels, heights, depths, leads, etc. Payment will be made on measured Surface area in "Sqmtr" as per the relevant & latest IS Code 1200. | 357.320 | Sqmtr |
| 2 | Providing, supplying and fixing metal plank false ceiling, strictly as per approved drawings, specifications and directions of Engineer-in-Charge, using factory-made pre-painted / powder-coated aluminium or GI metal planks of approved make, thickness and shade, fixed on complete hot-dip galvanized steel suspension system including hangers, runners, cross-tees, perimeter angles, anchor fasteners and all accessories, complete with proper leveling and alignment, corrosion-resistant components suitable for humid conditions, required cut-outs and neatly finished edges for light fittings, exhaust fans, fire detection and all MEP services, including access panels wherever required, inclusive of all materials, labour, scaffolding, tools, leads and lifts, complete in all respects, conforming to NBC 2016 and relevant IS codes; measurement shall be in square metres of finished ceiling area and the rate shall include the entire suspension system, supports, cut-outs, access panels, wastage and integration with services, with no extra payment for any item whatsoever. | 2872.430 | Sqmtr |
| 3 | Providing, supplying and fixing baffle type false ceiling in all corridor and lobby areas of the institutional building, as shown in approved drawings and as directed by Engineer-in-Charge, comprising factory-made aluminium / GI baffles of approved profile, size, spacing, thickness and shade, pre-painted / powder-coated finish, suspended from RCC slab using complete hot-dip galvanized steel suspension system including hangers, suspension rods/wires, carrier channels, perimeter trims, anchor fasteners and all accessories, including precise alignment, uniform spacing and level, provision and neatly finished coordination for light fixtures, linear luminaires, fire detection devices, sprinklers, diffusers, signage and all other MEP services, including access panels wherever required for maintenance, using corrosion-resistant components suitable for public and semi-open circulation spaces, inclusive of all materials, labour, tools, scaffolding, leads and lifts, complete in all respects, executed strictly as per approved drawings, manufacturers recommendations and directions of Engineer-in-Charge. Measurement shall be in square metres of finished ceiling area (plan area). Rate shall include all baffles, suspension system, supports, trims, cut-outs, access panels, coordination with services, wastage, leads and lifts. No separate payment shall be made for height, spacing, alignment, fixing accessories or service coordination. | 12907.060 | Sqmtr |
| 4 | Providing and fixing factory-made ISI-marked 32 mm thick solid-core flush door shutter of approved quality & conforming to IS:2202 (Part 1:2023), blockboard construction with phenolic bonded core and including seasoned teakwood lipping patti all around, all edges painting/french polishing, finished on both sides with 1.0 mm thick decorative laminate of approved make, shade, and texture; fixed to teak wood frame as per the drawings & details with all necessary approved quality Matt Finish Hardwares like SS hinges, Aldrop, SS Handles, mortise lockset, tower bolt(s), magnetic stopper, latch, rubber buffer, CP brass screws, cost of consumables, etc. and all accessories as per drawings and schedule of hardware, complete in all respects as per manufacturers specification and direction of the Engineer-in-Charge. | 763.690 | Sqmtr |
| 5 | FIRE RATED METAL DOORS:- 2HR METAL FIRE DOOR Providing and fixing of METAL 2 HOUR FIRE RATED DOORS SINGLE/DOUBLE LEAF at all levels from ISO 9001-2000 certified Manufacturer. Fire door should be as per IS 3614 part-1 & part-2 and BS 476 part 2 or EN 1634. Recom mended fire door shall be tested and certified by an accredited/ approved third party. Door frame shall be double rebate profile of size 143 x 57 mm made of min. 16 gauge galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs with provi sion to be mortised, drilled and tapped. Door leaf shall be 46 mm thick fully flush double skin door, manufactured from 18 guage ga lvanised steel sheet. All doors and frames shall be finished with etched primer coating, stove zinc phosphate primer and thermosetti ng polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt spray test. HARDWARE fittings for single leaf door: Fire rated Hinges 3090 F, 5 Knl, 2 Ball bearing butt hinges size 4" x 3" x 3mm SS 304 and 1 no of Fire rated Mortice Dead lock 288, 55mm BS/20mm sq. fornd, SSS and 1 no of EP Cyl. 3515, 5pin one side key & thumb turn L engthis equal70mm, SNP and 1 no of Escutheions ZS 6612 for Europrofile cylinder SSS and 1 pair of Pull handle D type TGDI-D300, b/b 22dia, in SSS 304 and 1 no of Door closer TS 72 EN 2-4 with Std. arm and 5.4mtr of Self adhesive sponge seal for frames 188S, 1 mt length, Black all specified hardware fittings of Dorma make. Rate shall include for providing necessary hardwares etc complete as per drawi ng or as directed by the EIC. Consider average door size 1500 x 2400 mm. Rates include vision panel (300mmx600mm) and panic bars device. | 221.000 | Nos. |