Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4068009 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repairs And Replacement For Furniture Against Condemnation At Military Station Dhrangadhara Under Ge (a) Gandhinagar |
| Last Date For Submission | 18th May, 2026 |
| Opening Date | 25 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 0.00 |
| City | Gandhinagar |
|---|---|
| State | Gujarat |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | SCH 'A' PART-I (WOODEN FURNITURE) | ||
| 2 | TABLE DRESSING LADIES WITH MIRROR INCL STOOL(FD/MAP-II/07) DIMESION: The overall size of the the table dressing shall be 1150mm long 380mm wide and 1700mm high. DESCRIPTION: The sides, top, back and front of the base unit shall be of 18mm thick prelaminated MDF board.The bottom of the side units shall be of 12mm thick commercial plywood. The sides and back drawers shall be of 12mm thick prelaminated MDF, bottom of the drawers shall be of 18mm thick prelaminated MDF board 5 mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mm X 35 mm. A horizontal support of size 30mmX 20mm shall be provided in between two vertical members.The overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick prelaminated MDF. The top of the stool shall be of 12 mm thick plywood openable shown in drg. | 18 | Nos |
| 3 | Bin linen Multipurpose (FD/E6/MAP/09) Overall size shall be of 1000mm long, 380mm wide and 760mm high. Bottom rest shall be made of 19mm thick pre-laminated particle board(one side) and shall be 900mm long and 280mm wide and 75mm hih joined together in long and short sides. Multipurpose bin linen shall be placed over it. The bin shall be 1000mm long, 380mm wide and 385mm high. Back side shall be of 19mm thick pre-laminated particle board 1000mm long and 685mm high. Sides shall be of 19mm thick pre-laminated particle board 380mm wide and 685mm high. Top and bottom shall be of 19mm thick pre-laminated particle board 1000mm long and 380mm wide. A vertical partition shall be provided at 400mm from inner face of left hand side which shall be of 19mm thick pre-laminated particle board. A shelf shall be provided in the middle of left portion which shall be of 19mm thick pre-laminated particle board and shall remain uncovered. Two drawers and a cupboard shall be provided on the right hand side. of the bin. Bottom, sides, back and front of drawers shall be of 12mm thick pre-laminated partcle board. The partition between the drawers shall be of 19mm thick pre-laminated particle board. Front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. The shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of the shutter. The shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick pre-laminated particle board 543 mm long and 40mm wide shall be provided as base support in the front under the drawers. Teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. Teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it rns smoothly over the beares fixed on the the sides of the partitions of the bin. A handle shall be fixed in the center of the each drawer with 100mm long powder coated mild steel. All front edges of pre-laminated particle bd shall be fixed with 4mm thick teak wood edging as shown on drawing and as directed by Engineer-in-charge. The shutter shall have 4mm thick teak wood edging all round its edges. All exposed surfaces of teak wood shall be given high gloss French polish with lacquer finish. ON right hand side top of bin an abestos sheet plain shall be provided which shall be 6mm thick and 230mm. | 20 | Nos |
| 4 | CHAIR EASY (FD-229) DIMENSION: Oveall size shall be 510 mm long, 575 mm wide and 720mm high. DESCRIPTION: All wood shall be first class teak (MP). Front legs shall be 30mmX 55mm in section and 355 mm high up to seat level. Rear lgs shall be of 30mmX55mm in section and 30mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mm X 55mm in section and made to shape as shown on drawings. Front back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear. Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mm X 55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmX100mm in section of 60mmX1000mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mmX100mm in section joined toghether by vertical side rails of 30mmX25mm in section teak wood to form the frame. Canning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6 gm in ten running meters. Canning shall be done in godrej pattern. PVC shoes 25mmX25mm shall be provided at the bottom of all legs. FINISH: all wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer finish. | 50 | Nos |
| 5 | CHAIR FOR TABLE CARD (FD-353) Oveall size shall be 440mm long, 430mm wide and 890mm high. All wood shall be of first class hard wood teal (MP). Front legs shall be of 30mmX55mm in section form bottom to top of legs and 460mm high up to seat level. Rear two legs shall be of 30mmX55mm in section form bottom to top of legs and top rounded as shown on drawings.The legs at seat level shall be joined together with 30mmX65mm in section front, sided and rear rails made to shape as shown on drawing.The rails shall insert in the groove of legs by 15mm. Two sides stiffeners 25mmX20mm in secion shall be provided at 100mm high from bottom of legs joining front and rear legs in the sides.One siffener of 25mmX20mm section shall be provided in the middle of short stiffeners joining short stiffeners. Two horizontal back rests 45mmX15mm in section. ONe at 25mm from top of legs and other at 45 mm from bottom of the top horizontal rails shall be provided out of 45mmX35mm wood made slightly in curvedshape . Canning shall be done with 2mm wide and 0.4mm thick of shah or premier brand cane weighing not less than 6gms per ten running metre.The weaving shall be done GOdrej pattern.Hard rubber/PVC rings 25mm dia and 25mm high shall be screwed to the bottom of all legs. All wood surfaces exposed to view when placed in position shall be French polsihed with high gloss finish. | 4 | Nos |
6 Days Left