Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4042946 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repairs / Replacement Of Condemned Furniture Articles For Offrs/ Jcos/ Ors Md Accn And Otm Accn At Mil Stn Gandhinagar |
| Last Date For Submission | 16th May, 2026 |
| Opening Date | 23 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 39500.00 |
| Estimated Cost | 0.00 |
| City | Gandhinagar |
|---|---|
| State | Gujarat |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | SCH 'A' PART-I (WOODEN FURNITURE) | ||
| 2 | CHAIR DINING WITH CUSHION (FD/MAP-II/04) Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam(Kurlon/sleepwell) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm..Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm.All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be Melamyne polished with high gloss finish.Rest all as per drg. | 18 | Each |
| 3 | TABLE CARD (FD-352) (a) Overall size shall be 900mm long,900mm wide,760mmhigh. (b) All wood shall be of 1st class hard wood (teak wood) free from knots. (c) Top of table shall be of 18mm thick plain particle board as specified here-in-before coverred with green baize cloth. (d) 4 mm thick teak wood edging shall be provided around the top. (e) Irrespective od what is shown in drawing, 25mmdia decorative brass knobs shall be provided to each drawers. (f) All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish. (g) Hard rubber/PVC shoe of 25 mm dia shall be provided at bottom of all legs. (h) Rest all as shown on drawing. | 6 | Each |
| 4 | TABLE DINING 900X900X760 MM (FD-291) (a) Overall size shall be 900mm long,900mm wide,760mmhigh. (b) All wood shall be of 1st class hard wood (teak wood) free from knots. (c) Top of table shall be of 18mm thick plain particle board as specified here-in-before coverred with green baize cloth. (d) 4 mm thick teak wood edging shall be provided around the top. (e) All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish. (f) Hard rubber/PVC shoe of 25 mm dia shall be provided at bottom of all legs. (g) Rest all as shown on drawing. | 19 | Each |
| 5 | MIRROR DRESSING GENTS (FD/E6/MAP/16) (a) All woodwork shall be kiln-seasoned first-class hardwood (MP teak). (b) 18mm thick, pre-laminated particleboard on both faces with 4mm teak wood edging shall be used in cabinet Sides, top & bottom. (c) 12mm thick, BWR phenol Bonded plywood Commercial (both faces) Backing to the looking Mirror and back side Cabinet. (d) The mirror shall be 5.5mm thick polished sheet glass Supported on runner/ glass holder. 5.5mm thick glass shelves Continuous (piano) hinges brass, bright finish for Cabinet openable side. (e) All woodwork shall be melamyne polished. Rest all as directed by the Engr-in-Charge. | 16 | Each |
6 Days Left