Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4907961 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Periodical Services To Certain Bldgs Of Jco/or Md Accn Of Map-i And Map-ii And Other Buildings In The Area Of Age B/r-ii Under Ge (a) Suratgarh At Suratgarh Mil Stn |
| Last Date For Submission | 3rd Aug, 2026 |
| Opening Date | 05 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 80000.00 |
| Estimated Cost | 4000000.00 |
| City | Ganganagar |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Notes:- (i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, in such case the L1 bidder may be incorporated makes as approved by HQ CE SWC Jaipur in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. (ix) If a bidder observes any item in the BOQ that appears to be "Freakishly Low" or technically not required for execution at the site, the bidder must submit written comments to the Accepting Officer during the pre-tender stage or at least 07 days before the Bid Submission Start Date. (x) Any act by the contractor that is found to be against the interest of the Department,or commits misconduct or any complaint received through proper channels and supported by verifiable proof (e.g., fraudulent vouchers, negligence in execution, or attempt to cause undue benefit), shall be treated as a willful default.Such defaults shall render the contractor liable for an Adverse Remark ("NO") in the Quarterly Work Load Return (WLR), barring the firm and its related/sister concerns from participating in further tenders. | ||
| 2 | Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. | 1675.00 | Sqm |
| 3 | M&L for rendering 15 mm thick (Average) readymade plaster on inner/outer walls with READIPLAST by adding 17-19% of potable water by weight of material. For thickness above 15 mm it is recommended to be applied in multiple layers. Ready-mix plaster shall complies with IS and confirms the Compressive strength @ 28 Days-10-12 Mpa/ Bulk density-1500-1600 Kg/m3. Note: The rate quoated by contractor shall include cleaning of surface, application as per instruction all as specified and directed. Supply only water proofing compound shall be measured and paid for separately. Make: Ultratech/JK/Birla White (Level plast) or equivalent techno commercial make as mentioned in Appx'A' hereinafter. | 150.00 | Sqm |
| 4 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed by Engineer-in-Charge. | 95.00 | Kg |
| 5 | M&L for rendering 10 mm thick readymade plaster on inner/outer walls with READIPLAST by adding 17-19% of potable water by weight of material. Ready-mix plaster shall complies with IS and confirms the Compressive strength @ 28 Days-10-12 Mpa/ Bulk density-1500-1600 Kg/m3. Note: The rate quoated by contractor shall include cleaning of surface, application as per instruction all as specified and directed. Supply only water proofing compound shall be measured and paid for separately. | 950.00 | Sqm |
10 Days Left