Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4512108 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Building No P-65, P-66, P-68, P-69, P-70, Mw And Rw At Mil Stn Sgnr |
| Last Date For Submission | 27th Jun, 2026 |
| Opening Date | 29 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 93660.00 |
| Estimated Cost | 0.00 |
| City | Ganganagar |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismatiling brick tiles or terracing tiles, single layer on roofs and removing to stores complete all as specified and directed. | 325.00 | Sqm |
| 2 | Demolition Mud Pushka treatment on the roof slab upto the motherslab complete and removing to low lying area complete all as specified and directed. | 65.00 | Cum |
| 3 | M&L for Roof treatment to RCC roof as follows:- (a) Surface Preparation : M&L for the surface which are to receive the coating or treatment, must be free from oil, laitance, grease, wax, dirt or any other form of foreign materail adhering on it before the waterproofing job started. Dust free the surface including removing of existing treatment/ old felt/ loost plaster/ concrete etc. (b) Repairing of slab, parapet wall junction, cracks and other large blowholes by open in "V' shapes & filling by Cement mortar 1:4 with adding bonding agent SBR followed by fiber mesh tape with SBR in conjuction with cement. (c) PU Based Elastomeric Liquid Membrane System for Roof :- M&L for providing and applying Polyurethane Liquid roof waterproofing with improved water ponding capability thermal insulating elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and Solar reflectance Index 106 as per (ASTM E-1980-19)/Tear strength ~20 N/mm (Free film, 14 days, + 30Degree ) (ASTM D624) and Tensile strength > 2 N/mm2(ASTM D4541). After proper surface preparation , Apply one coat of self primer or SBR @ 1:5 Chemical : water ratio. Then apply 03 coats as 1st coat of Shaliurethane @ BTD white @ 0.650 ltr/m2 (minimum ) by brush /roller while the primer surface is tacky. Spread fiber mesh 45 GSM with overlaps of 50 mm in both directions when surface is still tacky. Allow 1st coat of dry than Apply 2nd and sililarly 3rd coat @0.650 ltr/m2 (minimum) by brush /rooler. Note : Minimum dry thickness (DFT) of roof treatment shall be 1.5mm.Make : Equivalent of M/S STP/SIKA India Pvt Ltd/ Fosroc/ bostik/Choksey etc | 325.00 | Sqm |
| 4 | M&L for levelling course for roof slab, Type B0, 1:2:4 (12.5 mm graded aggregate) using waterproofing compound (SBR) for maintaining proper roof slope and finishing cement concrete surface even and smooth without using extra cement complete all as specified.(Minimum thickness of concrete should not be less than 50mm at any point) Note : Waterproofing compound should be measured and paid separately. | 16.00 | Cum |
| 5 | M&L for PCC 1:2:4 , type B-0 as in benching (gola ) making concave shape gola of 80mm radius at juctions of roof/terrace with parapets/sides walls complete all as specified and directed. | 1.00 | Cum |
4 Days Left