Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3996950 |
|---|---|
| Organisation Name | Municipal Corporation |
| Tender Brief | Improvement Work Of Road From R-8/10 To 6/151 Via Mahavir School In Ward-84, Rajnagar, Kavinagar |
| Last Date For Submission | 30th Apr, 2026 |
| Opening Date | 30 Apr, 2026 |
| Document Cost | 9350.00 |
|---|---|
| EMD | 475410.00 |
| Estimated Cost | 15847000.00 |
| City | Ghaziabad |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and applying tack coat with bitumen VG - 10 grade using bitumen pressure distributor at the rate of .30 kg per sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per technical specification | 25275.00 | SQM |
| 2 | Recycling pavement by cold milling of existing bituminous layers, Using by Bituminous Concrete (Grading-II) using bitumen VG-30 content is 5.4% bitumen weight of mix. For reclaimed material, fresh bitumen will be required to the extent of 60% of normal requirement., planning the surface after cold milling, reclaiming excavated material to the extent of 30% of the required quantity, hauling and stock piling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required, mixing in a hot mix plant, transporting and laying at site and compacting to the required grade, level and thickness, all as MoRT&H specified in clause 519. | 1011.00 | CUM |
| 3 | S/L Hot applied Thermo Plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thick ness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. the finished surface to be level uniform and free from streak and holes. rates all including of all taxes royality vat etc all t & p /machine material and lobour required for proper complition of work.( SOR 2022 SI.N. 22.02 NEW ITEM ) | 842.72 | SQM |
| 4 | Reflective Raised pavement marker providing and fixing of raised pavment markers (cat eye) type x ASTMD - 4956-04 avery dennission /3m (USA make) having moulded body of polycabonate ASA, HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H circular its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light ), electronically welded to the body. The length, height and wiedth of the body shall not exceed 130mm 20mm, and 105mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm. on each side stoping at the angle of 35+5 degree to the base to ensure maximum reflectively. it shall comply to specification of category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate corforming to ASTMD 788 or equivalent. with 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. All T&P machine and labour required for proper completion of work.Note: The composite warranty jointly signed by original manufacturer & authorized converter of at l( SOR 2022 SI.N. 22.05 NEW ITEM ) | 375.00 | JOB |
| 5 | Supply of 22.4 to 53 mm gauge stone ballast with stacking for measurment etc all complete as per the direction of engineer in charge.RMR | 23.25 | CUM |
16 Days Left