Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4821305 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair To Pcc Plinth, Path Sign Boards, Line Marking/ Painting On Runway And Dispersal Including Runway Shoulders Filling At Af Station Gorakhpur |
| Last Date For Submission | 6th Aug, 2026 |
| Opening Date | 13 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 112000.00 |
| Estimated Cost | 5800000.00 |
| City | Gorakhpur |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Material and Labour for preparation of old painted concrete/bitumen surfaces with washing down soap water of runway, taxi track road for painting with cold retro-reflective paint including spreading of 500micron size glass beads (350gms/Sqm) by using mechanical mode of application as lines, dashes, arrows, letters applying one coat of runway road marking paint aqua based retroreflective type golden, yellow, black, orange or white colour as approved by Garrison Engineer to give uniform finish complete all as specified and directed. Make: Asian Paint Apcotrak-WBR or equivalent Note :- (i) Masking tape/ steel/ wooden frame or template should be used on edges of paints before painting work and removed the masking tape after paint is applied where ever required and as directed by Engineer-in-Charge. The contractor has to ensure that, the lines, dashes etc marked with paint shall be in proper shape and finish as required. Any errorneous marking shall be make good by the contractor on his own cost and nothing extra shall be paid on this account. | 2800.00 | SQM |
| 2 | Material and Labour for preparation of old painted concrete/bitumen surfaces with washing down soap water of runway, taxi track road for painting with mechanical mode of application as lines, dashes, arrows, letters and applying one coat of runway road marking paint aqua based golden, yellow, black, orange or white colour as approved by Garrison Engineer to give uniform finish complete all as specified and directed. Note :- (i) Masking tape/ steel/ wooden frame or template should be used on edges of paints before painting work and removed the masking tape after paint is applied where ever required and as directed by Engineer-in-Charge. The contractor has to ensure that, the lines, dashes etc marked with paint shall be in proper shape and finish as required. Any errorneous marking shall be make good by the contractor on his own cost and nothing extra shall be paid on this account. | 8680.00 | SQM |
| 3 | M&L for preparing of existing concrete surfaces / plastered / unplastered surface of wall and applying one coat of synthetic enamel paint in red and white with alternate square/ rectangular panel in runway / link / dispersal / PQC/ side wall area all as directed by Engineer-in Charge. | 400.00 | SQM |
| 4 | M&L for one coat of black synthetic enamel paint on three sides of DTGM (1.20 x 1.50 Mtr) installed in airfield area consisiting of black synthetic enamel paint background and red colour high intensity retro reflective tape numerical/alphabet letter (150mm width and 1000mm height) on two sides complete all as specified and directed. | 10.00 | EACH JOB |
| 5 | Cutting of existing Runway/taxi tracks at cracks and at spalled edges mechanical tools making groove at edges cleaning through air blower/air blastisng and applying propriety primer on the cleaned surfaces to obtain tack and finally filling in ELASTOMERIC CONCERETE of make Choksey Chemicals/CIPY/BASF or equivalent (prepared by mixing part A, part B and adding fiberglass sand all as per manufactureres instructions) and properly mixing in purpose made mixer plant electrically operated) to obtain a homogeneous mix and finally tooling the surface with hand tools to obtain a grooved textured finish. Note: (i) The rate shall include for providing masking tape at joints and form work required if any at spalled joints edges. (ii) The quoted rate deemed to include for making good the disturbed joint filling around the area where material is applied. (iii) All material shall only be procured directly from manufacturer. | 500.00 | 1000 CUM |
6 Days Left