Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4859544 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Repair/maint Of Electrical Operated And Manual Operated Gantries/cranes At Af Stn Gorakhpur |
| Last Date For Submission | 27th Jul, 2026 |
| Opening Date | 03 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 17240.00 |
| Estimated Cost | 862000.00 |
| City | Gorakhpur |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M &L for Carrying out load testing of EOT crane of capacity 2 TON to prove the satisfactory operation of electrical controls motors gears boxes protective device system interlocks mechanical componeants like wire rope Wels scecctions of the crane in all Motions (LT CT Hoist in high full load and testing of crane in over load at 110% and deflection test all as per IS:3177 of 1977 through Competent person of UP factory rules or any accredited agency as approved by GE(AF) Gorakhpur, duly certified including all consumables completed all as specified. (Note: (i) Necessary pre calibrated certified loads(50 Kg pieces for higher alttitude) with load cell digital/ analogue type and Hydraulic mobile crane at site required for carrying load test shall be arranged by contractor and the rate quoted shall be inclusive of the same. (ii) Contractor has to arrange necessary tarpaulin/plywood to unload weights on the floor and ensure that the electrostatic floor/floor surfaces is not scratched/damaged during testing. (iii) Contractor submit two sets of original load test record alongwith certificates to Department. | 3.00 | Each Job |
| 2 | All as per item No 01 herein before but for HOT crane of capacity 05 TON. | 3.00 | Each Job |
| 3 | All as per item No 01 herein before but for HOT crane of capacity 03 TON. | 6.00 | Each Job |
| 4 | All as per item No 01 herein before but for HOT crane of capacity 02 TON. | 3.00 | Each Job |
| 5 | Comprehensive maintenance,preventive maintenance & periodical repairs of electrically operated overhead traveling (EOT) / Hand operated overhead traveling (HOT) complete including Material and Labour for periodic inspection/servicing to be carried out, and making/keeping the cranes serviceable, installed in various technical bldgs , including the following:- (i) LONG TRAVEL MOTION AND CROSS TRAVEL MOTION (a) Checking Gear box oil level and filling with required oil and rectification of leakages if any. (b) Brake adjustment (c) Checking of Long travel & cross travel wheel for any noise/malfunctioning. (d) Checking grease of Geared couplings, nut tightening and replacement of grease nipple . (e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil. (f) Checking of electric motor connections, insulation resistance value etc. (g) Checking the cut-off at extreme ends with the limit switch. (h) Checking and greasing of shaft pedestal. (ii) HOIST MOTION (a) Checking Gear box oil level and filling with required oil and rectification of leakages if any.b) Brake adjustment (c) Checking of main bearings of the Rope Drum including greasing the same (d) Checking grease of Geared couplings and nut tightening. (e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil. (f) Checking of electric motor connections, insulation resistance value. |
20 Days Left